TelePresence and Video Infrastructure

I'm wondering if there is any value in having the multisite feature license on an EX90 registered to CUCM 8.6.2a.I'm looking at a slide deck that lists the capabilities of the EX90 and under multiple calls, it reads (1 active 4 held).Am I understandi...

Hi guys!Are there any assumptions about SIP registration failure looking through the log?TC 4.2.1Mar 20 11:35:02 (none) main: Thread TshelldC has TID 2425Mar 20 11:35:13 (none) main: 88.05 SipReg W: Transport failed to send registration (sipexcept:  ...

Hi Guys,              I have a situation where TMS Server is not part of the domain or not in the AD as a object. But TMS is configured (under the network settings-> Ad authentication) to connect to the AD server. Basically we have created the servic...

Hi Gents,We have endpoint which is registered to Vcs 7.1. Also this endpoints has added to Tms 13.1.2. Endpoint using DHCP.Some users shutting down this endpoints. They are opening only when they want to use it.  Endpoints status appearing "System st...

In the TMSPE deployment guide it states "Cisco TMS Provisioning Extension Option Key: Must be added in Cisco TMS".I have performed a fresh 13.2 install and the Movi 25 license key is already added successfully. At this point do I need an additional T...

With Tim WalkerWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn from Cisco expert Tim Walker on how to install and upgrade the Cisco TelePresence Management Suite Extension for Microsoft Exchange (TM...

Hello!I have a customer that resently bought a SX20 to incorporate in their video conferencing solution.It is working fine exept that when the presentationcables sound connector isn't pluged in the system gives of a loud humming noise.The cable lies ...

HI,I'm looking for a doc or preso that describes the EX90 call features when registered with CUCM. My customer is indicating that they can not do a simple conference of a PSTN call into a P2P call between two EX90s.I've seen this as, but hoping there...

Hi,Does anyone have any idea how to delete a system that is inaccessible?When I try to delete these devices I get the following error.

Hi,I have been reading on the Internet that E20's are supported on CPCM however I am struggling to find how to add these.. I have the below to choose from but I dont see E20. Can anyone help?