TelePresence and Video Infrastructure

Resolved! Where can I find documentation on how to get VCS-C and VCS-E to exchange Presence information

I've turned Presence on my VCS-C and VCS-E, but depending on if I am VPNed in or not, I can only see the presence status on my side of the firewall.I've checked the admin guide for x7.1, I've looked in the Authenticating Devices guide, and I'm at a b...

fast busy using feature access codes (FAC)

I have my analog phones under the control of CME but when i try to press the **5 to pickup a call I get a fast busy the first time i press the * prefix. Any ideas why this is ? Parts for config belowstcapp ccm-group 1stcapp security trustpoint SJS2...

cisco jabber and mps and presentation

Hi guys,wondering if one might be able to help, i was in a conference call today using free movi into a mps and was unable to recieve and share presentation. I could see locally that i was clearly sending it. Other participants were reporting the sam...

Resolved! VCSE Bind9 Dns Srv record issue

Hi All I recently implemented a VCS Express solution in my domain but I need your help to troubleshoot my dns issue. My infrastructure is: 1 VCSE in dmz 2 nic option and natted with public IP1 VCSC in lan subnet All working fine, Traversal call, re...

VCS Integration with Avaya Communication Manager

Hi Experts,Just a quick Question, Has anybody implemented integration of VCS with Avaya Communications Managers to allow Avaya VOIP Calls to Cisco Endpoints ( Audio Only).Is it possible? If yes, How is it possible and what are the requirements and ne...

Call failed btw E20 and Polycom HDX4000

Greetings, I got problem when calling from E20 to Polycom HDX4000. Call failed right after pick up. Test case as follows: Both E20 and Polycom register with MCU4501(acting as Gatekeeper). Call also failed when calling from Polycom HDX4000 to E20.Ca...

Resolved! VCS-E deployment

Hi there everybody,I'm very new in Cisco telepresence technology,so I need some advises about deployments.I have scenario where customer wants VCS-E only to be integrated in their network as firewall traversall to communicate with external clients....

VCSc, 3 VCSe Trav Zones, and calls to unkown IP's....

Can someone please explain to me the expected performance here? I have a need to query all three Traversal Zones for AnyIP, but it seems only one is selected, regardless if Zones are same or different priorities....

Third Party OCS Client Integration with VCS

Hi Experts,I have a Customer who is using its own properitery Software Softphone client for making Video calls . It is a SIP client running on UCS Server , registered with IP PBX System for ISDN users as well. It is using TLS Connection. It makes i...

Resolved! Understanding procedures and best-practices for FindMe deployment

I have successfully upgraded to TMS 13.2 with TMSPE and VCS-C/E to x7.1.I have two MCUs, a TCS, and a small number of physical endpoints and Jabber Video (JV) users inside my network directly registered to my VCS-C in a couple of different subzones b...

Prevent network from test calls

Hi guys,I would like to ask if anybody knows, how I can prevent a machine caller system to make phone calls to my VoIP to GSM network.Can I use some appliance, or something else;Because I thing that it is little difficult problem.Thanks a lot!

SIP calls timeout at 15 minutes

If I have TLS set as transport for SIP settings for traversal zones on VCS-C and VCS-E, my SIP calls from internal to external fail at 15 minutes. If I change it to TCP, calls work fine. Between the VCS-C (LAN) and VCS-E (DMZ) is an ASA5520 and betw...

Como poner password al web interface del TANDBERG C20

Por alguna razon en mi sistema no muestra el cuadro de Usuarios y/o seguridad referidos en algunos manuales. Hace falta upgrade de firmware????

ftp://ftp.tandberg.com vs. cisco downloads

Hi together!Would be interesting to hear how you handle downloads, how you keep informed about news and what thoughts/solutions you have.Does somebody know what happened to the ftp part of ftp.tandberg.com?It returns a "425 Failed to establish connec...

Issue with the Motion/Sharpness on Edge95/3000MXP - Radvision MCU

Hi All,I'm having a problem whereby an edge95 or a 3000 mxp dial into a HD/SD CP radvision classic MCU service and the main video is switched to the pc input, the far end will see the pc input for a brief moment before the screen goes black. Switchin...

TelePresence and Video Infrastructure

Forum Posts

Resolved! Where can I find documentation on how to get VCS-C and VCS-E to exchange Presence information

fast busy using feature access codes (FAC)

cisco jabber and mps and presentation

Resolved! VCSE Bind9 Dns Srv record issue

VCS Integration with Avaya Communication Manager

Call failed btw E20 and Polycom HDX4000

Resolved! VCS-E deployment

VCSc, 3 VCSe Trav Zones, and calls to unkown IP's....

Third Party OCS Client Integration with VCS

Resolved! Understanding procedures and best-practices for FindMe deployment

Prevent network from test calls

SIP calls timeout at 15 minutes

Como poner password al web interface del TANDBERG C20

ftp://ftp.tandberg.com vs. cisco downloads

Issue with the Motion/Sharpness on Edge95/3000MXP - Radvision MCU

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Cisco Codec Pro Question

Recording p2p calls on Codec pro

CS-Codec-Plus V01 # TCC7-25 compatibility with Polycom RealConnect

CMS 3.3 Webbridge LDAP user login issues

FN - 72497 & 72517 related to Cisco Room Navigator

Expressway zone not responding- inbound TLS negotiation Error

UNLICENSED STATUS ON CMS WITH CMM

Cisco Webex MS Teams video calling (VIMT)

Quad Camera Power Supply part number?

Audio distortion from a cisco webex codec pro