Unified Communications Infrastructure

hi all,i need to configure a greeting message for the operator phone so that any outside caller when dials the Operator number( which is a DID number)first hears the message and then the operator phone should ring.i am using unity 4.0 and CCM 4.1 Tha...

I am getting ready to test a dirt restore of 4.2 of a failover pair using new hardware. At the same time, we want to test an upgrade to 5.0. I see no reason to restore the secondary server and to just build that as a new 5.0 secondary and just rest...

Dear all i am attaching the cue version how we can configure the voice message & MWI

I have looked through the Administration documentation for CER and I can only finds PRI references to the gateway trunk. I have the capability of doing both DS0 or PRI. Is there a requirement for the trunk to be a PRI?

I have CallManager 4.2, and im using the latest softphone which is 2.1.2, and im trying to use it from my house to connect to callmanager. i know it uses RTP. But im having issues connection.. is there any help form?

When integrating via SCCP, the CM-TSP did not support G.711alaw. From what i can gather, the SIP trunks do not require a TSP. Does this mean we can terminate G.711alaw to Unity without an MTP?Has anyone tested this?

our two clusters(2nos 7835+ 2 nos 7815) are communicating with each other via ICT(non-gatekeeper controlled)and it's working ok,one cluster is having a single group and a single device pool,but the another does havediff groups and diff device pools ,...

I've got a query regarding accessing Unity remotely and changing the options following Sign In. At present when I connect remotely, hit *, I then enter in my extension & pin, I'm then given various options. Is it possible to modify this so when I sig...

Unity 4.2.1 ES83 w/E2k3 offbox UM - when we run the CUBI tool, at the end of all of the selections when you select next to import from a CSV file, the CUBI window just closes without an error. If you look in the application event logs, you see the fo...

Hello Everybody plz i need the Cisco IOS router 2821 configuration with 4 FXO Port i want Used MGCP Protocol and with CallManager 4.2 and I already using Callmanger 4.2 with Cisco Router 2811 router and I want Add more Vocie Router 2821.plz Guide me ...

Anyone know a way to monitor the Raid disk status on a Redhat server?

why are they different, autoqos sets queue0-limit 65 15 15, while srnd recommend 5 25 40, however with this config the priority queue stays at the default of 15 and that leaves 15% unaccounted for.also in new version of code queue bandwidth is done i...

Hi,Im looking at a split cluster design for CallManagarer and Unity 5 failover. All the requirements for Unity 5 failover can be met.The primary server must be on the same side of the firewall as: • The secondary server • The Domino message store...

I have a Call Manager 5 server and Unity Connection 1.21. I am looking for good options to send faxes coming in on a DID via email. It looks like Unity Connection doesn't have this capability built in like Unity. What options/suggestions does anyo...

Hello, does anyone know if you can upgrade MeetingPlace for audio, web, and Outlook directly from 5.3 to 6.0 or is it required to install 5.4 first.Thank you for any responses.