Hello, friends.I have a situation like this: I have my own physical server with a configured UCM (latest version) + Expressway 14.2.7, MRA mode enabled, and the push service activated. Phones (Jabber) are connected to it. I receive calls and messages...
Forum Posts
I want to forward a company number to the cellphone of an external worker, with no physical phone in the company. Because there is no phone device, I can't set the external phone number mask and I need to use a Calling Party Transformation Pattern. I...
Hi Experts, May I know about the MPP (Cisco Multi Platform Phone license) from you. We have CUCM using customers with 7841 phones (500 qtys). They would like to use these MPP license instead of FLEX A and use these MPP license for Third Party IP PB...
I have an issue with our recording setup. I have created the recording profile and secure sip trunk to our cube. When I make a call, I see the call coming in, but the call is not sent to the recorder. When I do 'debug voice dialpeer all' I see that ...
Resolved! Restarting the TFTP server
Is there any way to restart the TFTP server from an API call on the CUCM?
Hello All, CallManager: 10.5(2) After upgrading our CUCM servers from 8.6 to 10.5 the active partition's disk usage has been hovering just shy of 90%. I thought I remember there being a way to lower the amount of usage on the partition, by possibly...
Resolved! Webex Calling - Import Cert
Hello all, I have a problem when I try to import a cert with the command:crypto pki trustpool import clean url https://www.cisco.com/security/pki/trs/ios_core.p7bI tried used this command on a virtual Cisco CSR100V Cisco IOS Software [Gibraltar], Vir...
Consider a case where you have a PRI range of 200 DID numbers allocated by the Service Provider, and for some reason, you want all your outgoing calls to randomly select one of the 200 DID numbers, for example you are conducting a survey and you don'...
I have a problem with the forwarding of external calls.The client has an IPECS PBX, the telephones can make internal diversions without problem.When the phones activate the external forwarding, it doesn't work.The scenario is the following:Telephone ...
Our organization has recently outgrown the dial plan I implemented in 2000 (yes, Y2K!). I knew it was coming, but I thought I had more time. Now it's here. I've been using four-digit dialing internally, and assigning voicemail-only (no physical phone...
In the process of migrating a Unity Connection Cluster to new hardware, I have worked with TAC on this and the process they provided was to the start with the first node and do a DRS restore on the new hardware. After that is completed simply build ...
HiPlease help me with an issue I encountered when creating a new Route Group, specifically in the 'Find Devices to Add to Route Group' section. I couldn't find a trunk SIP named 'sip-trunk-D,' even though this SIP trunk existsmore details in the atta...
We are working on upgrading a Unity Connection Cluster and migrating to new hardware. I have noticed that only 4 of the ports on the secondary node show in service. It displays the correct total number of ports, I have checked CUCM and all 16 ports...
Hi all, I am unable to login to our CUC Application (previous person who configured it handed over an incorrect password) and I am trying to reset my admin password using the following command:"utils reset_application_ui_administrator_password"My que...
Hi all, We have a client who is asking for us to install a Webex Room Kit Codec and QuadCam Bar into a standard 8P meeting room. As it is a new build we need to put hearing augmentation into the system. I have not been able to find if the line out (3...
Recognize Your Peers
| User | Count |
|---|---|
| 4 | |
| 3 | |
| 3 | |
| 2 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
