I have a voice mail icon flashing on a key for x9999. x9999 does not have a unity vm box built. I do remember testing something a while back, enabling notification. How do I find what ext is notifying x9999 of vm's for another ext?-Dan D
Forum Posts
Hi All, I'm trying to order the latest version of CUCM to run in a VM application on our server. I have two 6851 physical phones and I'd also like to use 4 soft phones (Jabber) I've found the UC-15-SW-K9-XU= SKU on CCW which looks to be the right SKU...
Hi Team,We need to set up a new small branch office for 15 users with SIP PSTN service, integrated with our on-premises Call Manager. For this requirement, I’m considering an ISR router and believe the ISR 1000 series should be sufficient, rather tha...
Hi dear Friends,i have an issue with "expressway core"which is when i want to add "CUP IM and Presence" into "Expressway Core"it shows me this error:Failed: Unable to communicate with imp-pub.example.com. AXL query HTTP error "HTTP Error:500"CUCM ver...
Hi,In a productive environment we exchanged a C2900 with VIC2-4FXO with a C8200L-1N-4T with NIM-4FXO:unfortunately on the C8200 we get a "fxols_power_denial_detected" which will cause a fxols_power_den_disconnect.While I tried to tweak around with im...
Hello all ,I need your help I have a problem with Silent call on external for some devices Cisco 7821.The SIP call is silent at the start of the communication (the first 3 seconds) after, the audio is work fine.When we answer with the head speaker of...
Good day everyone,I have issue after upgrade CUCM from 12.5 to 15.0, where I cannot find phone especially with specific detail.In my case, I tried to find phone with specific description and filter "contains". when I click find button only showed tot...
Hello,please , i would like to know if the direct upgrade is effective from 12,5 to 15 and what steps to check before launching the upgrade ,i have latency problems because the sftp server is in europe and the call manger in asia
Currently I'm trying to figure out the following scenario:A call comes in on our SIP trunk from the PSTN, goes to Unity where a call handler picks up with Caller Input available and some of those are Transfer to Alternate Contact Number which will go...
As expected, when attempting to upgrade from CUCM 14(SU3) to CUCM 15(SU3), the pre-upgrade check reports insufficient disk space.I have done all the usual steps to free up space- delete unneeded TFTP files, run the free common space.cop file, adjust ...
In a Cisco Smart Licensing setup using Specific License Reservation (SLR), is it correct that an engineer cannot simply create a new Smart Account and generate SLR codes independently? My understanding is that SLR must first be enabled by Cisco Licen...
Hi, we are facing an issue registering the license with Cisco CUCM. Currently, we are at the site and there is no internet. This is first time registration for the CUCM server. Could you please suggest how to activate the license?
Hello, Calling Number is 1209 Called Number is 9XXXXXXXXXX I want to translate Calling Number to 0312XXXXXXX and Called Number to 05XXXXXXXXX but translation-rules on the translation profile doesn't work with below configuration. rule 9 should be use...
Inbound call to Call Handler on main number. Caller selects option which transfers them to our other phone system operators. The CID is not available from the PBX reports. Is there a way I can extract from Unity since the call hits the call handler f...
After the Broadcom VMware licensing changes, if we have a BE6K/BE7K running as a standalone ESXi host, which VMware licenses should be ordered? Previously, we used to order vSphere Standard.
