Hi We are trying to understand how vNIC failover happens with VIC 1340 & 2204 FEx. 2204 IOM VIC 1240 / 1340 with 2204 FExwhich has 16 x 10GBs connected through the midplane which is 2 x 10GBs to each Blade server (M4); One connection goes to VIC 1...
This may be a somewhat silly question, but we just upgraded to UCS Manager 3.2 recently and I'm finding it difficult to navigate the interface because the colors appear so washed out. Adjusting my monitor settings only gets me so far and throws off e...
Need help on design suggestion and risk involved We have Fabric Interconnect and Servers /Clusters behind that Fabric Interconnect. These Servers are grouped into clusters. One cluster is used for Internal Applications/Converged Infra, Other cluster ...
I need to open a TAC case for UCS Central. The TAC website wants a product serial number but I don't know how to find that within the product. Can anyone direct me to this information, or another way of opening a TAC case for Central? -Jay-
I've a UCS Mini and a cluster of 3 nodes Hyperflex, I'm wondering if could be possible to connect fabric 6324 of UCS mini to hyperflex fabric interconnect and then manage both from the same ucs manager dashboard? thanks in advance
In the cisco design documentation: https://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/118811-config-switch-00.html Vsan 70 and Vsan 80 traffic separated left and right side, does that means if we lose right side N5548 or F...
Which port should be opened when configuring Hyperflex site to site replication via WAN ? Regards Budi
I am facing some issue with the product UCS C240 M4S Server, BIOS Version: C240M4.2.0.4a.0.042220151400 The Server is not able to detect the hard disk, i managed to change the working Raid Controller and Hard disk but still there is no any success. B...
I have a C220 M3 and I want to put in a few of the largest 2.5" drives that were available for that platform. I've found 1.2TB 10K 6Gb SAS and 12Gb SAS varieties but also stumbled upon a 1.8TB 10K (UCS-HD18TB10KS4K) which appears to be from the M4 ...
The blade is using the M81KR adapter. The LUN appears during boot. I boot up using a virtualDVD-ROM with Win 2008 iso-image. I then unmap the ISO and map the UCS drivers for M81KR for Windows 2008. Then it says the LUN is offline and it let's me onli...
Hello I've been working on a strange issue with VMware for a good while now where I'm seeing that virtual machines running any flavor of Windows and Windows Server, in our vSphere environment that runs on Cisco UCS blade and rack servers, are showi...
Man oh man is the documentation for the IMC Supervisor 2.2 API frustrating... I am trying to query the list of discovered devices to see if an IP is present. Im hoping the "/cloupia/api-v2/CIMCDiscoveredDevice/{profileName}/State/{profileName}" will...
hi, i need to replace 6100 series interconnects with 6300 or 6400 series interconnects as currently one of the 6100 series interconnect is faulty.kindly refer me some useful steps or documentation which would be helpful for me.
i just finished installing Windows server 2016 on one of the B series blade and now trying to set up network configurations. during the OS install, when it prompted me for VIC driver, i loaded the storage VIC, i also notice there's a network version...
Hello.I need to install a VMWare Hypervisor on a "NIM E-Series NCE" (FL-UCSE-VS6-HYP=?B).I don't know where to download this hypervisor.I have an ISR (ISR4331-VSEC/K9) with a "NIM E-Series NCE" (UCS-EN140N-M2/K9=?B).(This hypervisor will be used to i...
