I get an error "No free port available in DVportgroup x" when I add the 33rd host to 1kV. I know the max limit is 64 hosts.What could be wrong?
I get an error "No free port available in DVportgroup x" when I add the 33rd host to 1kV. I know the max limit is 64 hosts.What could be wrong?
Is it possible to integrate the C series rack mounts (particulary C250 M2) with UCSM without using the 2248 for management as per this article for the C200 http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/ucsm-integration.htm...
Hello,Is dot1q supported on the 6248 Interconnects? We have a few 3750's and we have FC connected from the 3750's to the interconnects with the following configuration:Int gx/x/xSwitchport mode trunkSwitchport trunk encap dot1qSwitchport trunk allowe...
Hi All,We run a number of UCS pods of Windows Server and RHEL Linux B200 M2/B230 M2 Blade hosts on 1.4 (3m) & 2.0(2q) firmware.We do patching runs quite regularly via a scheduled job on each blade server.It seems that a simple reboot does not trigger...
Hi,i ve to change "max-ports " in a vethernet port-profile. Does this command cause a disruption on other VMs?Nexus 1000v version 4.2(1)SV1(4)Thanks!Andreas
Can a KVM be directly connected to?I know there is the nice "Launch KVM Manager" setup. But have a client would just like to give URL's to their KVM's and keep their awareness of UCS "limited". URL's to their KVM's would be ideal. I tried the below a...
Hi all, I have two questions:1. Does the 6248 support SFPs such as a GLC-T?2. I am aware that the 6428 support two upstream layer 2 domains by pining certain VLANs to port groups which are attached to differing layer 2 domains, but does this princip...
Can I perform an firmware upgrade using the UCS emulator?
HII have added a new vLan nic and added it to the blade server but I don´t get any connection to the network. Do I have to initate it in the fabric switch or any where else? Iám rather new to the Cisco UCS environment so basic how do I do to add a ni...
1.4(4f) has a later release date then 2.0(2q). Are both being actively being upgraded? Which release are we supposed to use?
Hi Guys,I just want ot know if there is way to take Service Profile Template and look at all the service profiles associated with it from GUI or CLI.Right now I have to go and look at each service profile and see which template it is binded to.So w...
I've set up VMmark on one of our Vblock platforms and I need some help. I'm running the tool on a cluster with eight Hosts and I'm not seeing the level of performance I had expected. I'm looking for someone to consult with to see if I've set somethin...
I have a couple of B200M2 blades that will not come online...during the discovery process, the FSM shows:ERR-IBMC-fru-retrieval-errorCould not get Fru from 7f060207, dn=fabric/server/chassis-2/slot-7The slot shows "needs resolution"...when i go to re...
Hi,I am now confused thanx to CCW and NetFormxCan one use 12x 16GB Dimms in a B230M2? What will the server do if I fit them?Netformx validated the config, CCW does not.Thank you in advance,Danie
Hi,It seems UCSM 2.0 (s) is having issues with JRE 1.7 and keeps asking for JRE 1.6. But the Java site does not allow download of 1.6 anymore. A screenshot below. Anyone else having same issues?Thanks,Amit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-21-2025 05:41 AM | ||
04-11-2025 01:36 AM | ||
02-23-2025 12:10 AM | ||
02-21-2025 05:23 AM | ||
02-20-2025 12:12 PM |