Unified Computing System Discussions

Hi ForumAfter upgrading to 1.4 we encountered following error messages:cause: cmc-vif-downcode: F0459description: IOM 1 / 2 (B) management VIF 1 down, reason Module removedseverity: majorand:cause: named-policy-unresolvedcode: F4525239description: Po...

:                         Anyone  else having Cisco UCS 6140/5108 chassis problems that cause the fans to  act up  and the I/O card to have power and temp alarms ver1.3.0 even  when the environmental conditions are OK?

Hi TogheterWe are having an UCS environment with 6 chassis and are using the version 1.4(1j). Now we are planning to upgrade to 1.4(2b).CISCO recommends the following order:If you don't have a host firmware package: Adapters/BIOS/Boardcontroller/FC-C...

UCS C200 M2 is not detecting hard disk controller(lsi megaraid 9260-4i ) in VMware ESX 4.0. I appreciate, if you can share the driver location.ThanksGowdaman

Hello All,I have an issue with our ESX 4.0 environment on Cisco UCS blades with firmware version 1.1(1L). We are booting our blades from DAS and have our datastores connected to a NetApp FAS3140 via iSCSI. Distributed Virtual Switches are controlled ...

Trying to follow the documentation on setting up a c200 M2 for Communication Manager install per the Cisco Unified Communications Manager on Virtualized Servers document.  Confused on how the RAID should be setup.  In the documents it states the RAID...

CIMC doesn't have any errors, just seems the Slot:2, SAS, HDD 135.972GB is missing in actionSee attached screen show from MegaRAID BIOS Config Utility.I have applied the latest host upgrade 1.3.1d.1

I know that there are advantages to using the vNIC capabilities of the VIC M81KR along with the 2100 IO Module up to the 6100 series Fiber Interconnect.But If the customer was not convinced of the management advantages of the 6100 and the UCS Manager...

All,I am running vCenter 4.1 U1 and UCS 1.4.1m.  In UCS I export the extension key for vCenter. I then register it as a plug-in in vCenter and receive a successful message. When I go back to USCM and look at the FSM I get a warning message with code ...

Hi,can i connect a 6100 Fabric interconnect directly to the NExus 55k over an FCoE link? Does multi-hop FCoE spans 55k and 6100?we have this scenario: 6100-->N55k-->Storage or (6100-->N55k-->N55k-->Storage)Can the UCS blade servers communicate with t...

Hello,Afetr seeing the statement: "The ICH10R RAID controller is not compatible for use with VMWare ESX Server software" I was wondering whether it truly refers to ESX (so ESXi is fully compatible) or it means both ESX/ESXi.Thanks a lot,

Hello - We have a Nexus 7010 and we are testing out using the fabric extenders for a need.  We have a demo 2224 unit and have it connected to our M132XP-12 10G blade in the 7K but the FEX won't come online.  I would have figured a possible software i...

Greetings all,Please note that the maintenance release for UCS 1.4 is now available for download from Cisco.com. This release, 1.4(2b), is a bug fix and stability release.As a reminder, in 1.4 the single upgrade bundle was broken into smaller compone...

I have two chassis almost fully populated with B200M2 blades with the cahssis cabled up to 2 6120xp fabric interconnects.  I'm continually getting Fan Modules in both chassis's saying that they are degraded because a fan is inoperable.  This happens ...