Can the duration of the disconnect time on an FSX line on an IAD be changed.When the calling party coming into the IAD from the PSTN hangs up first. The call takes 15 to 18 seconds to disconnect.Can this be adjusted to disconnect sooner?Thanks
I we migrated from the 4.x to 6.1 version and I get this issue happening atleast the second time for me. My CCM stops responding a dn call processing and shows high CPU 100% utilization neither does it fails over to the secondary server. help appreci...
when i established a call from one location to another locaion, during link change call break for about 14 seconds, but in ping after one second route is changeing
Guys, How are you?I have two routers that are configured to support the VoIP service. The VoIP calls are working, but sometimes I'm facing the quality problem, same with QoS applyed. I don't understand why this happen! I think that with configuratio...
hiactually i have two sites connected with analog E&M in trunk modewith routers 3845(vic2-2E&M) and 1760 (vic-2E&M) and with these routersit works ok, but i need to change the router 1760 and install a 2811 (vic2-2E&M)but with the new router doesn`t ...
I don't understand how to solve below message.Call awarded and being delivered in an established channelThe reason:The user is assigned an incoming call that is being connected to an already-established call channel.Question:1. Why the call being con...
Hi,I would like to know which tool can be use to process data coming from cgma (Cisco Gateway Management Agent )I cant find any documentation or software that support cgma.ThanksrgdsAbdelBskyB
Currently I get a DS3 (coax) handed to me and I mux it to T1's and plug it directly into my systems. There I can hold call conferences among other things.My ISP is offering to bring me DS3's over IP for much cheaper. What I will need is a gateway t...
hi,I have a big problem for VOIP QOS on ATM interface. Unable to have a proper voice on an ATM interface, no drop packets ...I give you a link is to download a PDF that explains everything with schemas. Thank you in advance.
I could use some examples of how to provision N00 on the pgw2200. I am using the PGW behind a pair of ITPs configured as STPs. The switch is located in North America.Thanks in advance
Hi,Does 12.4 (AS5400) support percentage VoIP traffic dispatch?e.g. it has 16 T1 of AS5400, total 368 B channel. 12.5% to provider "A" and 25% to provider "B", the rest to provider "c"rdgs
Hi guys,I'm not really good at voice - so please bare with me :)I have a situation where I cant make a voip call via SIP using class4/5 softswitch behind NAT/PAT network.The diagram :NAT/PAT --- cloud/MPLS --- softswitch.the softswitch provides IP ce...