Voice Systems and Accessories - Small Business

Hi,i need the turkish language dictionary for SPA30x and SPA50x Serie Phones. Can anyone help ?bye

Guys We had configured UC320 for a client couple of months ago....He came out with couple of objections like....1.  Call forwarding takes about 18seconds...2.  In process to return a missed call, you cannot hit the dial button as dial pattern has to ...

Can someone explain how to set up the following:I have a UC540 on 192.168.1.150 (Data VLAN) the router for the site is 192.168.1.1 and hence the default gateway for the PC's etc.I am trying to set up a remote SPA525G2 to connect via SSL, is this poss...

Hello,I have configured one blast group for all (7) employees which is linked to the companies main phone number.I have configured Night Service schedule to forward calls to an external mobile number. Unfortunately this number can only be configured ...

Hello,How would I call a telco service number beginning with a *, from a Cisco IP-phone connected to the UC540?I cannot seem to add numbers with * in the outgoing dial plan in CCA 3.2Thank in advance!Johnny

I have 2 analogue trunks and 3 sip trunks, 2 spa508 and an analogue telephone.Caller ID is received on the SPA phones for ALL incoming trunks, however caller ID is not displayed on the analogue phone for ANY trunk.Region is set to UK. The analogue (F...

I want to use in the headquarter an SPA-8800 to be conected with my Panasonic PBX using the FXO interfaces, and in the branch offices I want to use SPA-8800 to receive the extension from the Panasonic in an analog phone.How to configure the SPA-8800 ...

We have 3 blast groups setup on a UC560 and each was setup using the Telephony Setup Wizard.  When calls come into the Blast Groups they show up on phones as "FOR: 398" which is the auto attendant extension.  When the calls go to VoiceMail, the email...

Hello,We were using our UC320 with a wimax router/modem made by Zyxel and we had no issues related to the network only the bad Wimax reception.  Now we switched to DSL and got a new modem made by D-Link.  The internet access seems to be goin on and o...

Dear All,Continuing with the setup of my UC320W and SPA303s. I'm looking for translation of audio messages and menus for VoiceMail in french. Do you have any idea where I can change them?I'm also looking for a mean to change the localization of my SP...

How can we setup our system to show the call information for the line the we are monitoring.  I have a 7975 that is monitoring several lines.  I can tell when someone is on the phone (button red) but I have no idea who they are talking to.Noticed on ...