How do you set up intercom calls on the UC 520, 540, 560 platform? Can it be done in CCME or CCA? Or is it CLI only?Is there a document showing the configuration for doing this?Thanks, Chad
How do you set up intercom calls on the UC 520, 540, 560 platform? Can it be done in CCME or CCA? Or is it CLI only?Is there a document showing the configuration for doing this?Thanks, Chad
Hi,is there a way that the SPA525G shows the Name of the Caller if its number is in an addressbook.MayBe with XML app, i know it works with CUCM and 79XX phones but i there any equal for the UC?THANKSHSS
Hi all,We recently deployed the server edition of CallConnector for approx 20 client PC's, linked into CME for one of our customers. We have however been left with one little snag and I wondered whether anyone had experienced this before and could...
Hi All,We are having this strange issue with speed dials and SPA 525g's running firmware 7.4.3 and 7.4.4 but NOT 7.2.5. What occurs is you place a speed dial either via phone menu or web menu and when the phone checks in and retrieves the first Prof...
What ports does SPCP use? Same as Skinny or ?Thanks!
Hi,A customer want's to use both an auto attendant and call forward night service to external number for short brakes.The scenario.Open hours 10-18 -> AA with menu optionsClosed for lunch 12-13 -> AA with openhours playingBrakes -> Receptionist dials...
I will let to have both my Cisco IP phone to ring as well as my Blackberry. I would then like to use my Blackbery to transfer a call to another extensionPlease adive is I can do this out of the box with the UC560
Hello,How do we configure the UC500 to choose the outgoing POTS voice line? i.e, Calls should always go out thru voice port 0/1/0 first and if its busy rollover to 0/1/1 etc. I have a 8 FXO port UC500.I beleive there is a preference command on the ...
Is there a door access solution to use with the UC540?
Configuration:1) SPA90001) SPA400 with 3 analog lines1) SPA400 for Voice Mail3) SPA508G PhonesI'm having a strange problem with my AA - I want all phones to ring several times before transferring to the AA. In the Setup Wizard I've selected: Ring ext...
From my partner:" /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-...
We just recently rolled out a UC560 with CME 8.0/CUE 7.1.3/IOS 15.0(1)XA Release fc2. We have 48 users with combination of 7942 and 7962 phones. At present, we are experiencing intermittent fast/busy tone when dialing out and it happens only very s...
I have a customer that we sold 8 CIPCs to and they are just now discovering that they run 64bit software on their laptops… We’re supposed to install them Tues 9/8 UGH! So, my questions are as follows: 1) Does the CIPC work in a 64 bit environment ( I...
Hi,A client switched to SIP telephony on thier UC520. The first day everything worked fine, the second day incoming call's did'nt come through. After a reload the trunks became registered again and calls started coming in. After thier lunchbreak (whe...
I have a client that has bought a uc540 and wants his two depts to have a diffrent source of MOH. Is it possible?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: