Dear SBCS Community,As we approach the release date for the second beta drop of Cisco Office Manager (http://www.cisco.com/go/officemanager), we would like to recruit 8 end users that are familiar with our UC500 product and use it on a daily basi...
Has anyone had any luck connecting a WIP310 phone to a SwitchVox system? We are running SwitchVOX 4.5 SMB. We also have a Linksys PAP2T that connects just fine to the system and using a similar configuration, the WIP310 won't work.
Hi all,I have been trying to get FAX configured for our UC520Fax to email is just not working for me so I would not like to redirect the FAX communication to our office FAX machine. This machine has an private IP address 192.x.x.45I have onramp confi...
i have a uc 520 for which i upgraded the ios and cue and of course when the upgrade using cca 2.2.2 completed and the uc 520 rebooted the ios was corrupt. so i opened a tac case to get help reloading the ios. the guy helping upload said that i would...
I have 2 separate subnets on the network. One for the PC's and one for our VOIP equipment. I have, with other hardware, been able to connect to a wireless AP with a static IP on the VOIP subnet and been able to use it just fine.The WIP310 refuses to ...
SPA8800 does not pass the call from PSTN port(line 1) to VOIP port(phone 1).If caller called on PSTN line its keep ringing, not forwarded to VOIP port(phone 1).For eg; SPA3102 pass the PSTN call to VOIP port(Phone 1).NO settings found in SPA 8800: P...
Quick question regarding the phone display on the 7942. In the upper right-hand corner the user's name is displayed. Can this be configured through CLI or does it need to be done via CCA?Thanks in advance for the help.Jeff
In case of a sitation where a customer have around 70 users disctributed over 4 sites connected via ADSL Connections, can we position UC500 Solution where UC560 will be located in the main site & other sites are using this centralized system? or we h...
Maybe I am being lazy, ignorant, or a little of both. I admit that I do not spend much time in CCA configuring our boxes, but spend most of my time designing and working in cli or cue gui. So here goes:1. How do I build intercom extensions via CCA? ...
Hello all,i have a uc520 on my office and i wan to up 802.1x on siwtch 2960 for connection users.My architecture:PCUSER--------IPPHONE------SWcisco(with 802.1x )-----------IPBXIn this case thz port where iphone is connect is configurate like thisinte...
Hi,Does someone know how to get permanent licenses for a C1861-UC-4FXO-K9 ?On the device now:sh license all License Store: Primary License Storage License Store: Evaluation License Storage StoreIndex: 0 Feature: c1861-uc-15u-upgrade Ve...
Hi I have two SPA 3000 which I am using with a SIP service provider for about 3 years now, recently I have noticed on one of the unit that the actual tone goes in background and there is loud humming noise coming whenever I pick up the receiver. Afte...
Hi,SPA94X series is end-of-life. I recently purchase SPA9000 and waiting for SPA504G. Does SPA50X fully compatible with spa9000. I have a bit concern since I saw one post here that it has problem.Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
