VPN

Hello to all,configure the AnyConnect profile and everything is working fine.Have only one problem...I will that the user get the prompt to decide if download the software or go the portal.I tried this settings but is not working. group-policy grp_ho...

Hello...I tried to find an answer searching the earlier discussion, but with no success.I have a problem, regarding the Cisco VPN Client for Linux (32bit). The latest version (4.8.02.0030) running up to 2.6.25 kernel version, but I need it for the ve...

Hi All,We have been running a Cisco ASA 5510 (8.3(2)) using WebVPN passing credentials through to a Citrix Web Interface for single sign using the post plugin (latest version) for sometime now. We have found it to work well and up until now have had ...

can i make site to site VPN with pix firewall having single interface?that single interface will have a private ip.and my actual peer ip would be on my boundary router natting to my firewall interface ip.i cant find any config guide for single interf...

ASA 1 with VPN to ASA 2. Private WAN behind ASA 2 that I can't seem to reach from ASA 1. Has to be something obvious I'm missing, as I can talk ASA to ASA and ASA1 can talk to WAN....Map attached. Sanitized configs....ASA 1ASA Version 7.2(4)!interfac...

Client has Pix 515-e with multiple static NAT entries setup.  One static NAT does to one division of the company, a second to a different.  The first one will allow PPTP connections just fine to a 2003 RRAS server.  The second has an XP box with dial...

Hi AllI am facing an issue with a site to site VPN connection between a cisco PIX 515E firewall and a peer as Juniper firewall. The tunnel status reports stable when checked and there are no abnormal error messages, but the issue is in the access of ...

hi,i have a little ipsec vpn client problem.If i connect from my home network to the company network the monitoring shows a connection with "IKE IPsecOverNatT" and i`m able to connect to the servers and so on.But if i connect from a notebook with a m...

Dear All ,              Can anyone tell me that how to forward protocol udp using IPSec VPN between two sites. I have configured IPsec VPN in router between multiple site using Hub-Spoke Topology .Clients has one sotfware which support user-define pr...

Hi Team,I have some queries regaridng IOS supporting features for Gre-IPSec Tunnel configuration.In my Organisation we have Cisco C1841-IPBASE-M Router is there but we need to establish a Gre-IPsec tunnel ,it is not accespting the Crypto commands. Ca...

Hi all,          I am about to deploy a Remote access VPN, I have generated the config with SDM. And I need some guidance before i jump to the testing phase. There are my goal, I need 3 groups(office,travelers and Guess). For now I only have one grou...

Hi Everyone,can anyone tell me how do I create a banner for my VPN remote access users? ThanksAlfred

Hello All,I'm trtying to connect two sites together with an IPSec VPN tunnel between a couple of 5505s.  I used the Wizard tool from the ASDM GUI and I am not able to get the two sites talking.  What commands can I use to troubleshoot this problem fr...