Buy or Renew
Buy or Renew

VPN

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Cisco CyberSecurity
Labels

Forum Posts

Start a conversation

Resolved! Site to site VPN, can ping router but not clients

I have set up a site to site between an ASA5505 (corporate) and an 871w router (remote).  The tunnel is up, and I can ping anything on the corporate network from the remote network.  However, when going from corporate to remote, I am only able to pin...

mbmcadams by • Level 1
  • 2485 Views
  • 2 replies
  • 0 Helpful votes

Resolved! ASA and Group URL

So I have the need to provide two different SSL VPN environments for two different customers on the same ASA 5510 appliance.  Can I create two Group policies, each with a unique group url specified and then assign a ssl cert matching the group url?  ...

One way vpn communication

Hi, I have a site-to-site vpn between ASA & PIX.  Configuration are perfectly alright. But the problem is only when i  initiate a traffic from PIX side the ASA side hosts respond. It is like 1  to 1 it response. i.e if PIX side host A initiatez a tra...

IPsec over NAT-T

Dear All,Site to Site VPN tunnel and Anyconnect , IPsec VPN are configured on the ASA-5520 device. Currently IPsec over TCP/UDP on port 10000 is enabled.I would like to enable IPsec over NAT-T in addition. If I do that what will happen to the existin...

Resolved! ASA VPN with certificates

I'm after abit of consultation.I have a ASA 5510 in my hub, static public IP address.I then have a ASA 5505 as my spoke, with a dynamic IP address.I have used a dynamic crypto map with PSK and all appears working.My one concern is that I have been fo...

Resolved! Cisco Client Not Getting DNS

I have a cisco asa 5510 set up to work exactly like I want it to, with the exception that the clients dont get an dns server when they connect. I thought that the blurb below should take care of that, but unless i specify the dns on the client it doe...

Resolved! VPN on ASA5550

I have set up a Remote Access VPN using IPSEC on an ASA 5550. All group and user configurations are completed. A VPN session is establised using Cisco Client software, but I am not able to access the internal network.  Any suggestions?

Leo Bruni by • Level 1
  • 754 Views
  • 3 replies
  • 0 Helpful votes

Windows Vista x64 Cisco VPN Installation Error 1722

Hello,I'm trying to install Cisco VPN v 5.0.07.0290 on a Windows Vista x64 laptop without any success. First I was getting a different error connected with the DNE. Found the solution for this problem, installed the DNE Updater, but now I'm getting E...

ckyuss by • Level 1
  • 1499 Views
  • 0 replies
  • 0 Helpful votes

Adding entries to crypto acl causes tunnel to crash

Hi Guys,I'm wondering if anyone else has had similar issues.We have a working IPSEC tunnel, we go to add additional crypto acl entries to said tunnel (on both sides) and the tunnel crashes and won't come back up.  Now we remove the new entries and th...

AnyConnect profile question

Hi,We have a 2821 router running 12.4(24)T3 and want to upload and configure an xml profile to be sent to the client. IOS version 15 has the web import svc profile command which looks as though it should do want we want but I can't see an equivalent ...

Resolved! VPN Logs

HiI wanted to know is there a way through ASDM to look at if a user was connected to the network over the weekend and if so for how long.Thanks in advance and have a great day.

View All