VPN

Hello all,I have a problem need your help. Our users will use VPN to remote access to office internal private network, they are assigned IP address from 192.168.1.0-192.168.1.254We are using Juniper firewall as our Internet firewall and it will point...

Hello,We have an ASA5510 configured with SSL WebVPN.  We've also installed RDP plug-in and it it working fine with Radius.  Now, we would like to use auto-signon.  I've tried to configured it, however I haven't had much luck so far.Has anyone configu...

Hi,I can connect to the VPN via Cisco VPN Client but I cannot ping any ip from the LAN. I already tried the crypto isakmp nat-traversal 20 but still no luck. I am attaching my config. Hope you can help. Thanks

Hi to everybody,I need help about a problem that is making me crazy; it's a routing problem that happens ONLY using Windows Vista or Windos 7; with Windows XP all works perfectly.SCENARIO:In the following 6 firewalls installed, I have: 1 ASA5505, 2xP...

Hello All,We use Cisco 3845 router with an NM-8AM-V2, 8-port modem module for dial-up connectivity. It's been working perfectly before now but i just discovered that the LED light for each port is OFF. I pulled out the telephone lines and tested each...

Hi all together!I need a 1:1 NAT between a remote Host and a internal host for a IPSec Site-to-Site Tunnel for each of our customers. I need this configuration  for a dial-in remote maintenance concept shown in the Picture.My Problem is, that i have ...

Hi All, a few weeks back I posted issues I was having with Anyconnect and Exchange server. Its my gut feeling that its an exchange issue especially since it only affects windows 7 users when they connect via anyconnect and try to open outlook. What h...

I am having some trouble with an 871w. Currently I have no firewall configured, I am using NAT. The router is connected to a residential cable modem. The issue I am having is that a client of mine is unable to connect to his work VPN from a PC behind...

After configuring a cisco 1841 for Vpn, when I try to connect I get this error in the client Vpn logs:316    21:37:50.175  02/17/10  Sev=Warning/3 IKE/0xE3000057The received HASH payload cannot be verified317    21:37:50.175  02/17/10  Sev=Warning/2 ...