VPN

HelloI m imlementing a scenario like the attached diagram by connection the LAN behind ASA-1 toward network behind ASA-2 and ASA-3 using vpnL2L,the tunnel is in up State between ASA-1 and ASA-2 while it didn't come up between ASA-1 and ASA-3I attache...

HiIs it possible to connect win7 integrated vpn client to connect to Cisco Concentrator using L2TP, PP2P, ipsec or L2TP over ipsec? Many tanks in advance!Sfanayei

Can I use Cisco AnyConnect VPN to connect to Cisco's vpn Concentrator?Tanks a lot!Sfanayei

Hi,Could someone explain me the steps in configuring remote VPN in Cisco C870 router? I already have two site to site VPN's configured in the same router.Thanks for any help,Ribin

Hi,I have 1841 router with following specs;IOS: ipbasek9-mz.124-24.T1HWIC-8A/S-RS232 in slot0WIC-1AM-V2 in Slot 1Console cables are connected from 0-3 on 1st port of 8A/S-RS232 to 04 devices starting Cable 0 to Switch and cable 1 to ASR router etc.WI...

We need to establish a site to site ipsec vpn tunnel between sites. However there is a major overlap of internal private segments, ie. we both have 192.168.x.x, 10.1.1.0 etc.how can this be resolved?

I have an ASA 5505 and 5510 connected via IPSec L2L VPN. The 5505 has a single 192.168.15.x subnet on Eth0/1, while the 5505 has 10.101.10.x and 172.30.10.x subnets on Eth0/1 and Eth0/2 respectively. With the current VPN I can access 10.101.10.x from...

I need to know if the Cisco 3000 VPN client works with Red Hat Linux 5.3 or SLES 10

Hi,Is Cisco going to discontinue support for IPSec vpn client and support only Annyconect VPN client? What client is best for remote access?Headend device is ASA 5510.

We have an new ASA 5510 configured for IPSEC remote VPN connections. Everything is working well except that telnet sessions to a business system at headquarters timeout while idle. It appears that they time out after about 2 hours. Our idle timeout i...

Well, here goes...I have two T1s going to two different sites coming back to my central site. I also have two firewall devices at these sites for Internet access.I would like to set up two VPNs and sue the T1s as failover. It was suggested that I u...

TopologyBranch Office:Pix501 - ass hardware clientLan 192.168.10.0 255.255.255.0HQASA5510 - VPN ServerLan 192.168.0.0 255.255.252.0Remote UsersVPN CLient 5Address Pool 192.168.95.0 255.255.255.0Hello, i have problem with VPN tunnel for Remote UsersI ...

Hi,as a default, Cisco IOS expects exactly the same passwords on both Devices that are doing PPP CHAP authentications between them.What i need is a mutual authentication of both sides using a different password for each authentication. Assuming two r...