VPN

Hi All,I have set up a ssl vpn test account and installed a cert on my asa 5510. when i go to the webpage i get the logon screen and then immeadiately after i log in i get a screen saying certificate validation failure. when I click the cert, it is ...

Hi!I have an ASA5510 8.0 with multiple IPSEC tunnels connected to it (from remote offices). How can I configure ASA to permit communication between offices trought ASA?

Hy,I have this 1811 model, with two physical interface FA0 and FA1, both connected to ISP. From these two BGP is running and we re using our own IP network.There are three VPNs site to site with three equipments: - Juniper - PIX - Cisco routerAll the...

All,I have a requirement to connect some branch offices to a central site using a legacy TDM network with E1/G704 circuits. The telecom provider will provide an E1/G704 trunk into the central site and similar connections into each remote location and...

Dear All,I am facing an issue with by Crypto session on my 1841 router. I have a site to site VPN tunnel and when ever the last mile at other end is fluctuated, I needto Clear Crypto isakmp for the tunnel to re establish. Is there any configurable so...

I am having a problem with my 2821. I am trying to have my connecting cleint on VPN use a dhcp scope on a windows 2003 server. If I have the cleint connect with a fixed ip everything works fine. However when you ask to use a dhcp address the client t...

I have an application with three ASA 5505's. I have attached a diagram.The application is currently one single network with one ASA connecting the network to the internet and allowing VPN client access into the network. The network is expanded wit...

Dear all,I have a DMVPN- hub to spoke scenario.Its working perfectly.Hub-- 2821 router spoke -- 877 router.spoke(877) is using an ADSL connection.now i have a plan to provide back up link at spoke level, using AUX port to v.92 modem, suppose my ADSL ...

I have ~50 IPSec tunnels to various sites and I need to be able to turn on "inspect h323 h225" and "inspect h323 ras" on a per tunnel basis.All tunnels are using Policy NAT.enabling this globally breaks the H323 connectivity for tunnels between ASA a...

USING AN ASA 5505, CAN I ATTACH AN ISP CONNECTION TO PORT "0" ON THE ASA, AND HAVE IT FAIL-OVER TO PORT "1" WITH A DIFFERENT ISP IF THE ISP ON PORT 1 FAILS?SEE THE ATTACHED DIAGRAM, I AM ATTEMPTING TO CREATE REDUNDANT LINKS WITH A WIRELESS NETWORK. ...

Hello,I have an isdn line as a backup with the following policypolicy-map backup class preced-5 priority 45 class preced-4 bandwidth remaining percent 30 class preced-3 bandwidth remaining percent 30 class preced-2 bandwidth remaining percent 20 ...

<p>Hi,</p><p>I want to know the purpose / Need of configuring</p><p>1. IPSEC over GRE Tunnel</p><p>2. GRE over IPSEC Tunnel.</p><p>I donot know what is the purpose of thest two designs.</p><p>Thanks in advance</p><p>R.B.Kumar</p><p> </p><p> </p>

Hi all,i have following qos map configured in ios:class-map match-all <name> match qos-group 1Now i want to do the same in a ASA. Does anybody know how to configure this on asa? Thanx in advance!