VPN

I have a Cisco VPN client that I connect to a client. The tunnel comes up when on the office LAN, but I can not PING or connect to the servers anything across the tunnel. The same works from my home. I have a Checkpoint Firewall allowing "any" servic...

i ave not taken my ccie lab but i hope to do so soon i need to have some info on how much switch configuration is involved bcos i dont have access to a switch but i am using dynamips for my preparation.

I have recently purchased a Cisco ASA 5505. I have a dedicated server with a hosting company. They offer VPN access via PPTP not IPSEC. I was wondering if and how I could connect my ASA via PPTP to their network? Any tips or pointers would be appr...

I have a remote access vpn tunnel established through a 3002 hardware client. Everthing is working fine for the most part. It's only at sporadic times that the remote users application will time out, maybe due to network connectivity.Looking at the...

We have two VPN 3005 concentrators, both without SmartNET. One is running vpn3005-4.1.7.F-k9.bin and the other vpn3005-3.0.1.Rel-3des.bin. The earlier version has fields for username, password, and domain, while the latter only has username and passw...

I'm able to connect to VPN using the Inside interface of my ASA 5520 however when I try to connect to the Outside Interface it acts like there's nothing there.I ran NMAP on both interfaces and the Inside interface is listening on 10000/TCP but the Ex...

I tried using remote vpn on my ASA.Connecting thorugh the client doesn't authenticate.Would like to know Do I need to use any Nat0 access list for remote vpn as well.Internal range is something 192.168.1.0/24 and using virtual ips like 192.168.25.1-5...

In certificate based vpn does each user has its own certificate?

Hi,My site to site vpn goes down intermettenly and had to clear isakmp sa for the tunnel to come up.When Tunnel Works Active SA: 1 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 11 IKE Peer: 122.122.122.6...

Hi, I'm trying to figure out how to script a VPN connection using Cisco AnyConnect VPN client so that you dont need to enter group, username and password. I've been trying with the vpncli.exe command but with no luck. Any help would be much appreciat...

Hey all! Thanks in advance for your attention to this one. I simply needed to know whether the local CA cert on the ASA could be used to authenticate the IPSEC VPN client, v4.8. The documentation states that enrollment must occur via a web browser...