VPN

We replaced a PIX 501 at our headoffice with 2811, IOS- advanced Security, version 12.4(8). We cannot get our VPN working. Everything else is working as it should be. Here is our VPN config from 2811*****************************************crypto isa...

Greetings, I'm having a problem setting up a DB solution using object tracking. First, the article states DDR must be configured first, which confuses me.Internet Access, either T1 or otherwise, where all traffic is routed thru the VPN tunnel. I'm ...

Does anyone know what causes the following isakmp error:Jun 09 11:24:18 [IKEv1]: Group = xx.xx.xx.xx, IP = xx.xx.xx.xx, Removing peer from correlator table failed, no match!Searches have yet to locate an explanation or a fix... Thanks in advance,Marc

I am probably supposed to know this already, but I shall swallow my pride and ask anyway:Suppose I have an ISDN primary rate interface with 30 channels, which provides a dialer pool. I then have several dialer profile interfaces that use that pool. ...

Hi gentlemen,I have configured aaa accounting on Cisco 3640 RAS and I need collect the aaa remote user time connections (start and end time connections) for time management cost.Accounting information received on IAS seems to be only from start remot...

We have a small LAN with an 837 (IOS 12.4(8)). I am using SDM (2.3.1) within the local network to configure the unit. We want to use URL filtering and I have been able to add urls. However, when deleting a url the unit simply times out and reboots it...

Hi,for months (if not years!) our users have been happily connecting over the VPN to our corporate HQ.However, this morning, we encountered a strange problem that only seemed to affect a few users. The users complained that they had got authenticate...

Hi, Can any one tell me does FWSM & cat 6506 support dynamic ARP table??

I currently have a 3725 with 30+ tunnels, there are 837's on the remote ends. For about 10 of the tunnels I want to build another tunnel to an ASA, so that if one goes down the other one passes the traffic. Trying to figure out if I can just add th...

Greetings all,I need some help going thru this configuration. Previous post, I would like the head quarter PIX 515 configure so that it can accept Cisco VPN client and at the same time l2l with a remote office. I tested out the VPN client and it does...

I have a cheap netgear gateway router that plugs into my dsl(verizon)modem. The router of course negotiates for a dynamic IP address, and it also negotiates for a DNS Server IP address, and the hosts connected to the router use the default gateway to...

We have an AS5300 and a Radius server. We are changing the Radius server. Besides changing the IP address of the Radius server on the AS5300, is there anything else that we need to do? Thanks.