VPN

Hello there, I am going to attach one Cisco 1760 router at the end of DSL line. My service provider has given us one static IP address with 255.255.255.255 subnet mask and no gateway address. I am going to run IPSec VPN between this router and our ce...

hi there to all. don't u think the context is still in premature mode. i mean it doens't support routing ,multicast,qos and vpns especially. do u think or have any idea that cisco will implement these features very soon in the box to make it a fully ...

I got customer that wants to do IP VideoConferencing over a VPN. So they want to connect to a VPN3000 as two endpoints, give each other their IP and do IP Video. I talked to TAC and they said its not supported becuase of dynamic IP. TACs reasoning do...

When the dialing router initiate to the receiving router, it gives an error message below at the receiving router end:*Jan 13 09:09:41.522: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x00E0 Sending Complete Bearer Capability i = ...

Hi all,We have a VPN-connection between a remote office (VPN 3002 hardware client) and our main office (VPN 3000 concentrator). At the remote site, we enabled DHCP, but since it is impossible to retrieve DHCP options like DNS and default gateway from...

I have a remote office with a 2600 LL & ISDN backup. Using dialer groups. I need the router to backup to the primary site via isdn to corporate RAS, however in the event of a major primary site diaster where by RAS is not responding i need to ISDN di...

Dear Cisco experts:I just purchased a Cisco 806 router on Ebay with 16 MB of ram / 12 mb flash. It will take some time to arrive, but I thought I'd ask some general questions right now. I am not sure which IOS version is included. My questions: 1. Is...

hi i have a problem. One of my client has got his sap servers behind vpn firewall. now he says he is looking for a Vpn solution in which his clients need not have to install any vpn client software ,other than sap gui which the clients will use to...

Hello,is it possible to configure all of the VPN access at one PIX 515e. Remote Access VPN and LAN 2 LAN VPN already work on the Outside interface but i cant use Webvpn the Command doesnt exist. Is Webvpn a Feature of the UR License ? I can't find a...

Hi,I have a Cisco 877 DSL Router. My connection has two static IP addresses. Can I set up NAT on each Public IP address to two devices on MY LAN using the 877?Thanking you in advance

Hi,I have just installed a CVPN3005 and am using the latest VPN Client. The 3000 will not talk to the 2003 DC in Kerberos/Active Directory mode, but will talk succesfully in NT Domain mode.Users can authenticate and get a DHCP address ok. However I...