VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Having check withhttp://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094e6c.shtmlDialer pool - Each dialer interface is a member of a single dialer pool; the pool is a group of one or more physical interfaces. There can be any...

ctychan by Level 1
  • 523 Views
  • 1 replies
  • 0 Helpful votes

Hi,I have a couple of 837 Routers connecting two sites using an IPSEC tunnel.At one of the sites i have a static NAT port fowarded to an internal IPie.ip nat inside source static tcp 192.168.57.100 3389 interface Dialer0 3389to foward RDP from the in...

pmcallion by Level 1
  • 270 Views
  • 2 replies
  • 0 Helpful votes

Dear All,I want my Remote ISDN users to Dial-In on my 3640 Router with specific User Name, Password & IP Address. Pls provide a sample configuration for User Name "test" Password "123" and IP address 10.60.5.5Thanks in advance.Anis

md_ani by Level 1
  • 553 Views
  • 2 replies
  • 0 Helpful votes

Hi all, I'm configuring a 3745 with an NM-16A connected to a modem bank and also a 30 port Mica Modem module served by an CE1 link to a PBX for dial in access. I'd like the majority of users to be able to authenticate via Tacacs but sysadmins to auth...

robward by Level 1
  • 304 Views
  • 2 replies
  • 0 Helpful votes

I am not sure if "service tcp-keepalives-in" generates TCP keepalives for TCP sessions "to" this router anad "service tcp-keepalives-out" commands generates TCP keepalives for TCP session "from" this router. Is this correct?Secondly, if I execute th...

Hi all.I have CVPN3020 authenticating users on External SDI Database (RSA 6.0) and this RSA Server is syncronized with LDAP Microsoft AD. Using Ipsec, the policies and rules configured in Vpngroup are applied sucessfully. Now, I am trying to use the ...

lomine by Level 1
  • 391 Views
  • 1 replies
  • 0 Helpful votes

Now I want implement Site to Site VPN,I had refer URLhttp://www.cisco.com/en/US/products/hw/vpndevc/ps2284/prod_models_comparison.htmlhttp://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a008007d0bf.htmlI found VPN 3020 Price...

emily by Level 1
  • 330 Views
  • 1 replies
  • 0 Helpful votes

i have customers connected to conc. 3015 through IPSec/UDP successfully. when their internet connection down their sessions to the concentrator still active until the idle timeout expired. when they reconnect again failed bcs i have give each one one...

paltel by Level 1
  • 708 Views
  • 5 replies
  • 0 Helpful votes

Greetings!I'll be hosting a web server (an all windows 2003 environment) in my dmz zone. Thats the only server in the dmz, while the rest of them (Exchange, DC, file server, backup, etc) all reside in the internal network. it's a small company, we u...

Hi All,I have find the following info on specific web site:"SA lifetimes i IKEThe main mode SA is cached to allow multiple quick mode SA negotiations . When a key lifetime is reached for the master or session key, the SA is renegotiated. In addition,...

mcardell by Cisco Employee
  • 1057 Views
  • 2 replies
  • 0 Helpful votes

Hi, I'm trying to setup a L2L VPN tunnel between a PIX 515E and and 506E. I have already one tunnel made between the 515E and another 506E. Anyways, on the 515E, when I try to send interesting traffic through to get the other side of the tunnel. T...

stevezups by Level 1
  • 480 Views
  • 4 replies
  • 0 Helpful votes

VPN3020, behind a PIX firewall on a DMZ, private side is directly on LAN.. when I bring up IPSEC tunnel, it auth's I get an IP, however for some reason I can ping anything I want on the network, but that's all I can do, can't web, telnet, ssh, RDP, V...

Hi.Anyone knows if it is possible with an 1760 configured with two VPNs: One site-to-site and the other a remote access VPN, from a PC using the remote access VPN use the site-to-site VPN?

regraxpto by Level 1
  • 355 Views
  • 2 replies
  • 0 Helpful votes