VPN

Hi,Below are supported routing protocol over IPSec tunnel for IOS router, PIX and VPN 3000 Concentrator.Equipment: feature: dynamic routing: supported IPSec peer1. IOS router: GRE/IPSec, DMVPN: all dynamic routing: IOS router2. PIX: OSPF Dynamic rout...

Dear All,I m facing a problem, my site-to-site tunnel doesnt get established when i initiate say from site A but gets established if i initiate for site B.Below is my setupSiteA(PIX515)---Internet---ISA Server Array---SiteB(PIX515)On isa server port ...

Hi,I am trying to set up my RAS router to forward dhcp requests. It previously gave ip's from a local address pool.I have removed any reference to the local address pool and added the command :ip helper-address x.x.x.x to the group-async 1 interface....

Him making VPN connection to Checkpoint fw using ng vpn secure remote client with application intelligence...I have pix 506 with 6.3. My vpn connectivity happens well. Worst thing is that the vpn client does'nt provide me with ip address nor does it ...

Hi,I am trying to configure Lan to Lan IPSec tunnel between two routers, using AH as packet authentication mechanism (transform-set = esp-des ah-md5-hmac)and having a NAT device in the path between the peers.I see that the NAT-T is being negociated a...

2 different laptops ae having trouble connecting to the pix. We get timed out and the error says the vpn sub systen is not available or code 413 connection terminated locally by the client. The connection did work before but now seems to have issues....

HI,We have just added a FastEthernet interface to our Cisco 3640 router at HQ which is connected to a newly installed SDSL line. The interface is up. Currently we have four site-to-site VPN tunnels out of the old ADSL interface, and we would like to ...

I setup a site-to-site VPN IPSec tunnel between a remote office (Cisco 831 router, IOS 12.3(8)T8) and a central office (Cisco 1711 router, IOS 12.3(8)YG2. The VPN tunnel works and I can communicate over it. Unfortunately, from the Cisco 1711 router I...

Hi all,I setup a MS RRAS VPN server and configured it as a PPTP server.I have a Cisco 837 router configured PPPoE support on it and enable DHCP server too.I'd like to configure my cisco router to allow VPN passthrough so that I can dial-in to my RRAS...

We have a problem with connecting to a website. Through this website the browser gets a kind of csv file which is used in an excel activeX component. The toolbar that is inserted in each website seems to be the cause of it (destroying the layout of t...

Hi guys,the IPSEC VPN tunnel is not able to form between 2 routers. I got the following message,anyone knows what's going on? thanks guys.*Jun 27 10:42:01.027 IN: ISAKMP (0:47): purging node -347822247*Jun 27 10:42:01.027 IN: ISAKMP (0:47): purging n...

Guys,Anyone know what this means?I get sometimes this message when I setup a site-site VPN on the PIX with software version 7.0(1).There is nothing to find on the Cisco site......Thanks,Edwin

We have a PIX 501 Firewall and I need to configure it to allow access to users for Outlook Web Access 2000. The OWA works inside the firewall, but I don't get any connectivity from outside. I would like to know what configuration parameters I need ...

We're looking to implement a RAS dialin solution using a 1721 router, my question is....Do we need to secure the connections with a firewall, or is AAA and encryption enough.

I'm having problem to configure my VPN tunnel back to my PIX so I'm trying to use cisco VPN client 3.x through the 837 but I'm able to have only one PC at a time connecting through. Any suggestion how to allow multiple VPN client through.RegardsYves