VPN

I am trying to configure easy VPN on a Cisco 1721 with a VPN module installed. When the router boots up i get the message :*Mar 1 00:00:24.007: %CRYPTO-4-TRANSFORM_NOT_SUPPORTED:Transform comp-lzs is not supported with the current hardware configu...

Greetings, we have 10 routers connected via TLS cloud, same broadcast domain. All routers and user subnets are using the same class B address(subnetted). We would like to build a full mesh ipsec cloud using any any access-list to encrypt traffic. ...

How do I prevent users from logging into my VPN pix 515 multiple times with just one account?

Trying to establish the Site to Site VPN between PIX & CyberGuard firewall. IPSEC comes up only when the traffic is initiated from the Cyberguard side. 'Show crypto ipsec' shows only outbound SAs from the PIX side after the tunnel comes up. Posting t...

Hello all,I am studying to take the Security+ Test (I plan on tackling the CCSP afterwards) and I would like to get some practical experience with VPNs.I have a cisco 1605 router on my lan and a version of IOS that supports VPN but, I have no idea ho...

I have configured PPTP on the PIX to allow a remote user connect.>Everything works great,except the remote user cannot Browse the Internet with his PPTP pool address..I am doing only local authentication..DO I need to disble NAT 0 for them to talk on...

Hi forum,I have setup deployment for l2tp/IPsec were wireless client authenticate versus ACS server via VPN 3000 concentrator.ACS is configured to search for users in Active Directory.The problem is that only after 5-6 times the user is successfully ...

For the networks behind my Cisco3030, do I need to add a static route to the internal interface of the concentrator to get to the ipsec- lan to lan connections in my remote offices?.

Does anyone know why ICMP Type 3 (Unreachables) should be permitted for IPSec VPNs?Thanks!

Hi AllI used pix as my company vpn gateway , i used ACS server as authentication server , then external databse is windows 200 ADI question is, how can i prevent some user login my vpn gateway , but the user had a account on AD serverThanks in advanc...

In currently trying to test my VPN config that I will be implementing at a new office. Now dont laugh, but I want to test the pix 501 from home. But I dont have a static IP, so what Ive done in the past is just dial in from home and switch the set p...

I have a WAN link between two IOS routers that will be encrypting all traffic via IPsec. I need to prioritise traffic across this link.I'm aware of two methods I can use:a) priority queuing and qos pre-classifyb) manipulation of diffserv bits (TOS) a...

Hi, Perhaps some expert can give me a pointer here.I have had some recent reconfigurations to allow a Site to Site VPN. The site to site and internet connectivity works fine from both peers, however remote window clients can connect but no longer acc...

hello,I would like to know if it is possible to configure VPN connection on a DMZ interface of a PIX 515E ?or does VPN only work on outside interface ?thanks

I have 3 sites - a head office (20 users) & 2 branch offices (5 users each)all sites have 512k DSL connections & Cisco 837 routersi wish to set up vpn connections between the branch offices & the head officeTraffic will only be originated at the bran...