VPN

Hi,I'm having a problem that really confuses me.Trying to configure a 827 to act as a remote endpoint for a VPN to a PIX 515. The IPSec & ISAKMP sa's will come up just fine, however, the problem is to pass traffic to and from clients on the 827 ether...

Hi Guys,We are currently running a Pair of VPN Concentrator 3030 with Cisco VPN Client and BlackICE personal firewall.It all runs OK on NT/W2K or XP but on Win98 the Cisco VPN CLient does not seem to recognise the BlackICe firewalls is running. These...

it seems that when a remote user connect by VPN to the corporate LAN, he can access to all computer and all server. I try to apply an access-list to inside interface, but it doesnt work. how can avoid vpn remote user to connect on specific server ?th...

1. One of the default user in VPN 3080 is 'config'. If this user is given the following access rights, it still couldn't to access 'File Management' area, with message "You do not have sufficient authorization to access the specified page."Authentica...

I'm trying to build a GRE tunnel across an existing IPSec tunnel so I can run OSPF for dynamic routing in a backup scenario.I have an IPSec tunnel built across the internet between two firewalls (non-Cisco). Behind each firewall, I have a Cisco 7206...

Hi, I have a problem with my Altiga. I try to configure TACACS for administrative management but I receive the following error:41369 07/12/2002 14:09:55.390 SEV=4 AUTH/15 RPT=38 Server name = 10.21.25.53, type = TACACS+,group = none (global server), ...

1.In cluster mode (either VRRP or Load-balance), is it possible to synchronize the VPN configuration? 2. Can the VPN concentrator be configured similar to the PIX Firewall Failover? (need to configure Primary unit, and automatically replicate the con...

I have a PE to CE connection via GRE tunnel with IPSec. When traffic comes from another remote PE (via a tag'ed link) I recive an error message "%CRYPTO-4-RECVD_PKT_INV_IDENTITY: identity doesn't match negotiated identity". (ip) dest_addr= 99.99.9...

Hell-o,New to VPN and IPsec. We have an outside agency that wants to create a VPN connection to one of our workstations. We are using a PIX515 firewall with 6.2 (1).Can I just simply create a conduit command for this? And if so what would that be?D...

Hi i'm new with vpn and before trying to use l2tp over ipsec, i'm trying to configre L2TP as voluntary tunnel from a router cisco to a client windows XP.1)Is it possible to configure a l2tp with windows XP?2)Does someone has a configuration sample t...

I configure a pix 515E ios 6.22, to accept vpn connection from remote user. Any thing seems to work fine, remote user can connect to the LAN and access all server. The little problem is that , as soon as the VPN tunnel is build, the remote user can't...

I've seen another note already in this forum for tunnelling both internet/corporate traffic through the VPN concentrator using split tunneling, however how can I make sure only corporate traffic is passed through the VPN box and internet traffic is ...

I wanted to find out acl's I will need on my firewall to allow the vpn client to connect to a vpn 3000 box via IPSEC ?I think the first one should be (for the IPSEC key management)..I'm assuming I need this??:access-list 180 permit udp any host <vpn...

Hi,Would anyone care and have a look at the configs of the routers and tell me what's wrong? I described the task I'm trying to solve and the problems in a previous message.I'll greatly appreciate it.----------router 1-----------!version 12.2service ...

We want to start using our 1720 routers to connect to offices using VPN over internet. Both offices have a serial connection to the internet and extra ISDN connections for backup. For normal operation we want to use the serial link to the internet to...