singapore try to connect sydney through vpn (NT) server. That vpn server assign internal ip addrewss for few clients but other clients get wrong external address but when u rebbot vpn server it's start working fine.What is possible cause
I have a 1720 VPN router that I configured for remote users to connect to using the VPN client that is used when connecting to IOS based VPN's. I also have a LAN-to-LAN tunnel set up to that 1720 from corporate. TAC has told me that the users who V...
I am useing PIX 515 with cisco vpn client 1.1. Problem is that connection is dropped when using then can not make connection again. dose SA expire time too short, I am use default setup? Thanksben
Hello:I have a pretty simple question. I was able to configure vpn access for my client site. So now we are able to connect from the boss's home to the firewall. We are using a PIX 506 firewall. The client is win2k using vpn3000 client software. My p...
I tried to initiate a VPN connection between a VPN Client and a Cisco806.the following error occurs: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Aggressive mode failed with peer at xxx.xxx.xxx.xxxDoes anyone have an idea ?thx hans
Hi,Does anyone know if it's possible to have multiple simultaneous IPSEC through NAT tunnels behind a PAT device? The PAT device that I'm referring to is actually a software router/firewall called WinRoute that runs on a separate PC. WinRoute suppo...
Does anybody know more about the above error message ? I get this error during authentication process with digital certificates between a Cisco1720 and a Cisco7140...I have more of the Cisco1720 configured the same way but having NO problems.
I am looking to cut datacomm cost by using VPN between 200+ remote sites and one data center.Has anybody done anything like this? What are my hardware options? Plans are to use DLS or ISDN 800 series w/ FW and 3DES at remotes. What are my options for...
The current platform that I am using is a PIX 515 runnig 6.0 code with the cisco VPN client ver 3.1.1.The problem that I am having is that I cannot ping any devices behind the firewall(priavate network) once the VPN has been established.I am not even...
I have the following situation:Internet client-->PIX 515--->2000 Server on LANI am trying to figure out the best way to allow a 2000 professional client to establish a VPN using PPTP to authenticate with the 2000 server providing routing and ras. I ...
All,I have seen this issue come up in a number of posts, and I am seeing the same issue at a customer site. Maybe if we can get everyone with the problem on the same thread, we can get a fix.At the customer site, there are ~50 laptops running 95 or 9...
We are currently testing a VPN solution which is to be rolled out to remote users using XP Professional on laptops. We can successfully establish the VPN tunnel through our ISP - no problem. We can then sucessfully logon to the NT domain when using W...
A remote user with a Win2000 machine installed DSL software which was provided by his ISP. He connects fine. When he installs VPN software, ISP software cannot find dialing device and fails to establish a connection. When he uninstalls the VPN cli...
I have a 3030 concentrator, is it possible to set different tunnels to have different VLAN tags, eg a sales person coming in will be tagged with the correct VLAN for sales and so will not be able to see the marketing resources, BUT a marketing person...
Where can I download the VPN client? I've hunted all over Cisco's site, and I can't find it anywhere. Surely they don't prevent you from downloading a free VPN client???
