VPN

I am trying to configure DHCP relay through VPN, I have seen this thread https://supportforums.cisco.com/discussion/11601681/dhcp-relay-through-site-site-vpn which is similarThe setup in my case is as follows: Site1:DHCP server, (TCR): 172.16.0.1WiFi...

I study my project according to this document ID:115014(https://supportforums.cisco.com/document/98081/flexvpn-anyconnect-ios-headend-over-ipsec-ikev2-and-certificates)Topo:R887(IOS-CA,VPN SVR,)-----------Win7My target is Win7 can connect with R887Pl...

Hi All,  We are working on deploying AnyConnect as our new VPN client.  We are using ASA 5545x's.  Currently, the clients are using a pre-set address pool created from 172.17.0.0/16 (separated in 16 groups to make it manageable). Our old VPN setup us...

Hi,Am in the process of setting up a number of VPN connections to this device. I then came across the below article and have since had second thoughts. http://tools.cisco.com/security/center/mcontent/CiscoSecurityAdvisory/cisco-sa-20131009-asa I don'...

Dear all, after years of using our ASA only for user's RDP cluster access (and my techie stuff such as SSH), I need to teach our ASA to deliver network shares, meaning providing access to these.I'm on ASA 8.3 and the Anyconnect is 2.4.(2).The Client ...

Hi!Trying for days to configure a site to site vpn between ASA 5505 and router 3925.Any help is more than welcome.Thank you! All external ip was replaced.ASA config:: Saved:ASA Version 9.1(4)!hostname iceRTRdomain-name ice.***.caenable password *****...

Hi,I've build a VPN tunnel between (ASA 5510) and CISCO ROUTER through internet.The 5510 is  in aggressive mode and the tunnel's up.Often the tunnel is traffic is getting terminated and the application were not working .When am resetting the peer fro...

I have (had) a working AnyConnect VPN set up with no split tunnelling (U-turning/hairpinning traffic) with dual authentication (certificates and Active Directory credentials), running 8.2.5 code.I switched the SSL settings over from "Any" to "TLSv1 o...

Site to site vpn is connect between Cisco Asa  Cisco Router.  But we can not ping to remote site. Can you help me please. Cisco Router 870 Configuration is as below.sh crypto isakmp sa, sh crypto session, sh crypto ipsec sa cammands as below too. Cis...

I have working configs for both a Cisco IPSec remote access VPN + L2TP-IPSec remote access VPN, however I can only get one to work at a time (depending on whatever dynamic map has a lower sequence number defined in my crypto map).  I get Phase 2 erro...

HiI have created site to site vpn between cisco ASA 5505 and  watchguard, but the tunnel is not up. Kindly share the configuration details for the same.RegardsSurendrakumar.T.R    

I have a problem that I hope someone can help me with.I have Cisco ASA 5515 at the head office and some Zyxel USG Routers on various remote locations.I have made IPsec site-to-site VPN between ASA and Zyxel. My challenge now is that I also want to be...

Hi All, I'm trying to connect windows built-in clients to a Cisco IOS IKEv2 headend. I want to use EAP to authenticate the clients with there AD credentials. For EAP, I need to use certificates so I will use self-signed certificates as I don't have a...