Hi Gents, I currently have a mix of 2700 and 3800 AP's deployed(ELM) in my environment with 5520 controllers, Mobility Services Engine and Cisco Prime . We can pickup and contain attacks on 2.4 but NOT on 5 gigahertz channel. We are simulating a Ho...
Forum Posts
Resolved! Usernames connected to SSID
Hi Is there an easy way to get all wireless clients usernames connected on an SSID from the cli? Cannot export or copy/paste from the clients page on the webpage.Thank in advance
Folks, In a Aironet based Network, how can we set the maximum length of session length on the WLC based on the MAC address of the Client.
Does the Cisco WLC have sufficient logging to keep track of clients that do fast roaming (e.g. 802.11r, 802.11k, 802.11v, 802.11w) between access points on the same WLC? I want to see that clients are NOT simply repeating the entire re-auth process w...
I have new created cisco wireless network with 2504 wlc. Now i need to setup wireless guest internet with the help of firewall (cyberoam)..once guest are connected the must redirect to a captive portal where they can give their mobile number to get...
Hi all, I am at a loss here...hoping someone can help. I am in the the process of doing a network refresh and we have bought a number of 3650 IP Base 24port and 48port switches and 2602 APs. I have configured a core switch stack (4 x 48 port stacked)...
Current setup:2 x 8540 in HA SSO 8.3.120.0 (2000+ APs)2 x 8510 in HA SSO 8.5.140.0 (test controller but currently has 150+ APs on it)Both 8540 and 8510 in the same RF domain. Recently deployed Cisco 2800s in a new building – APs registered on test WL...
A design question...We have one main building and four close remote buildings at our location. At the main building will be getting AT&T business fiber optic 50Mbps connection with 24 static IP addresses. One of the remote buildings is close enough ...
A user posted this comment on a different forum:" MIMO refers to the ability to split a single data stream over multiple, adjacent communication channels and requires more than one antenna " Does this mean that with 802.11ac, single client can send d...
I was able to setup and get my WLC setup, but then it fails to put a ip address on it. The port shows activity, but does not have any clients show up on the server. Any idea's?
Good Day All, Its me again................ I have a brand new Cisco 8500 WLC and on boot up it gets an IP and when I try to logon tot the console via web it wont take Cisco username and Cisco1234 password, please assist. See attached.........
Resolved! New Network & Public IP
Hi. Some of our staff are moving to a WeWork-style office and have requested to use their own AP to connect to the internet. I have a spare MR 32 that I want to assign to this new network. I have created the new network and added the AP to it, but I'...
Logging into WLC admin web interface using chrome results in endless login prompts, untill the max requests exceeded error occurs or cancelling (resulting in a 404) and retrying in a new tab.Is the mobility express / WLC admin interface now properly ...
Dear All,our 8540 wlc (Rel. 8.5.140.0) doesn't seem to support radsec. At least we haven't found any possibility to configure it. We only find a button to activate IPsec or to define a port (obviously UDP).Is it true that as of now the Cisco 8540 WLC...
Hello Folks, I have a SSID with 802.1x PEAP as authentication metod, i want to know if there is some way or configuration on ISE to ask for the certificate on the client side. I want to configure that if you do not have the option to verify the certi...
