Wireless

Hi there, When i try so do a "snmpwalk -v2c -c community  ip_address" it always gives me "SNMPv2-MIB::sysDescr.0 = No more variables left in this MIB View (It is past the end of the MIB tree)". Even if i put some OID in front it gives me that. Than...

Hi Would like to check if there are users complaining slow when accessing wireless, AP3602i and WLC5508, any bandwitdh tool from Cisco can useto really identify that the problem is with the WLC or merely the wireless traffic problem? Or any other pl...

Hello, i got stuck with the problem updating software on AP 1832 Mobility Express from 8.2.130 to 8.2.151. I have network with 4 access point, all AP have  mobility express image. I tried to perform update via TFTP. In the result i have updated only...

Hi All I would like to convert AP from mobility express mode to CAPWAP type , once I type ap-type capwap,it always show up "capwap process not ready yet. try after few moment" it seem like a capwap process is fail . AP: AIR-AP1832I-A-K9C wasincisco9...

Hi, I have an issue where the 2802i AP are not join the 2504 wlc the firmware is 8.2.151 which is reccomended. The 2802 get the correct ip and option 43 hex value set correctly to point to the wlc mgmt address but the 2802 are not hitting the contr...

Hi, I have a WLC 5508 and sometimes doesnt work, I introduce the user and password and the option "submit" not respond, even if I put a username that not exists, the captive portal not respond. It seems to be a problem between the communication of th...

Weird Issue here: Cisco 8510 on code 8.0.133.0. I have read of at least one other user having this issue a year ago, but no resolution. I have 3702i access points and in some areas, users call in with voice quality issues or other connection issues a...

Hi , How to use access-list for many MAC address.  access-list 700 deny   18f6.430e.2b7b, 18f6.430e.2b7b, 2082.c0d5.7eeb   0000.0000.0000 the above comand is right ?

hello, I configured fingerprinting on Infoblox IPAM. My new outdoor 1562i doesn't work because of the wrong "object ID". Actually, I am using the default one " Vendor Identifier AP.150" which is natively in the Infoblox. You can see more information ...

Hi Pals, I need to know if any version of Cisco WCS supports 3504 Wireless lan controllers. The latest 3.2.4 doesn't seem to have 3504 listed in its release notes. Any help would be highly appreciated.Cheers,Rajesh

Hi Everyone, I need help in one of the issue. there is issue on going with particular access point. clients are not able to connect to it and connect to other 2 LWAP's that are 6-7 meter away. Even  on standing close to that access point, no one is ...

Hi all, I am writing CLI to block some MAC address. for example: access-list 705 deny 7831.c181.d8ff 0000.0000.0000 access-list 705 deny 4404.4470.a7a0 0000.0000.0000 access-list 705 deny c4b3.0118.5258 0000.0000.0000 But I took mistake for a MAC a...