I have a 5508 controller and mostly 1142 AP's running 8.0.133 code. The clients keep losing their connections.
When I look at the controller the only thing I can see is that the AP's are disassociating from the controller. It doesn't appear to be fo...
cambie el sistema de los equipos AP´s para poder administrarlos de manera autonoma con la la imagen ap1g3-K9W7-M y ya logre realizar la configuración de punto a punto estableciendo uno como root bridge y como nonroot bridge y no tengo problemas con ...
We are now in the process of decomming our 'old' 5760 controllers, and MA/MC configured 3650 switches and I have a question as to the migration of the APs. I have done AP migration on APs that were directly associated to the 5760s, but I have not ye...
Is there a link or document explaining and laying out the acceptable range of SNR? I have seen one forum that stated +35 was a good number but would like to have some documentation to back our findings of a Spectrum Analyer report to a client.Thanks
Hi All,
I have a location with a WLC and 5 CAP's using a certain SSID. I have 2 SAPs I want to roll out to expand coverage. Can I use the same SSID for SAPs and CAPs on the same subnet?
Thanks.
Hi guys,
Why I have this message always generating in my AP:
Mar 21 11:12:05.823: IP ARP: sent rep src 172.16.16.10 0042.68ba.c1d4, dst 172.16.16.10 ffff.ffff.ffff BVI1
this IP address of AP?!
and the IP address of AP in my core sw ARP table is t...
Odd one here. Have 3702 APs that show exactly what you would expect for primary and backup images. In our case right now 8.2.141.0/8.2.121.0. Then we have a slew of them showing primary 8.2.141.0 and backup of 3.0.51.0. These WILL NOT take a new back...
I just got a new Cisco 2504 Wireless Controller and two AP2802i. I had to update the software to 8.2.141.0 before the AP can join the controller. So far everything is working but I want to connect to a SSID that is not broadcasting. I just get "Unabl...
Helo, we have a room (quite big) with 3 AP's AP-1850 dual band positioned as a triangle with 80 people approx.
Users relate about frequents disconnections and re connections, loosing connection for a seconds. A bad user experience.
In the Prime logs ...
Can anyone inform me how to find the exact number of software defined network SDN controllers to be implemented in wireless sensor network environment.
p.s These controllers will be connected via Ethernet cable.
We own a Cisco AIR-AP1242AG-E-K9 access point and we are attempting to install it for a wi-fi network in our company with it.
The device have previously been used in a wide space of our warehouse.
We would be sure that Wi-Fi radiations are not danger...
It has been discovered that 802.1x supplicant feature is not supported in the 3800 model. We are running wired ISE and attempting to switch VLANs which will not work with MAB. So we will need to hard set the ports for specific APs. Can anyone tell...
Maybe I have the answer, but I just cant seem to configure my way out of it
The scenario is as follows:
On a central site we have the Wireless LAN Controllers and the internet connection.
Between the central site and a remote office there is a 50 M...
