Wireless

We're getting complaints about a specific 1131AG in the field only being intermittently accessible. WCS shows both the a and b/g interfaces randomly bouncing, sometimes the reason for the bounce is unknown other times it says it's because it lost con...

Hello,I'm a newbie here, and I have a question regarding the RTMT.  How can i set up an alert via RTMT so that whenever someone is trying to log into my CUCM with the wrong password, i will get an alert from RTMT?Thanks in advance.Peter              ...

Hi,I want to setup a wlan environment with peap.When the remote user is successfully authenticated to a radius, the radius returns a vlan name.on the remote sites the vlan id differs.  I need to match the vlan name to the vlan id on the remote locati...

Hi,I have one question about AnyConnect using Wireless networks.Will i need some license to manage my wireless adapters using Cisco AnyConnect to connect to my wireless networks ?Thank you.

Hello Guys,My company Arcitect install 5508 WLC with port channel, he connnects 4 ports in 65k and other 4 ports to 65k backup  and make port-channel but when I see 8500 WLC configuration there is no port-channel configuration. do we need port-channe...

I need assistance in developing a acl that can block a computer on the LAN from accessing the internet from midnight to 7am everyday. The router is a 857W, the computer is 192.168.2.33 the internal gw 192.168.2.254 (dialer 1 is 1.2.3.4).acl 101 deny ...

Hi , i would like to do some test with wireless QoS. Is there any specific application (wireless traffic generator) for Windows 7 that sets up WMM UP values ?

Hi friends,We are working on a case for 3 buildings in a campus having a total of approx 1500 AP's. Client is looking for RTLS and RFID based application support.We are proposing Mobility services engine for the above requirement. Need help on few qu...

Hi,I have the following systems in place:5508 WLC - 7.4.100.00NAC Guest Server - 2.1.0I have setup an SSID with external Webauth, which is pointing to the login page on the NAC.All works fine but I cannot use the logout page which is customized on th...

I have setup an aironet 1262 with my ASA 5512 and configured it as an access point. I would like to add an additonal network to the ap for guests to use but I would like to segregate the traffic and only allow it to the internet. I am not sure how to...

Hi, Is there a command on WLC to check the current active radius server in the list?I have configured multiple radius servers and noticed in the logs the radius servers were often deactived and activated. I would like to see which is the current acti...