A mSent from Cisco Technical Support iPad App
A mSent from Cisco Technical Support iPad App
Hi,I have a 5508 wireless controller running version 6.0.199.4 (the image installed when the device was shipped) and I am trying to install by tftp version 7.3.112.0The issue is when using tftpd32 gets to 82% transfered then fails with the error "% E...
I have a 892C-W,this support 801.11N on Cisco WebBut I find its configurationi is only 54M!pls expert tell me why this?thx!I have this problem too0 Votes
Hi,Can Anybody suggest that, Is 802.11ac wireless module for Cisco Access Point 3602 is available to order ? Also, please advise about what Wireless controller we need to use for the support of 802.11ac wireless standard ?802.11ac will support only o...
Hi buddiesIs possible, in WLC or Cisco ISE, limit the simultaneous login?Example:Use A has laptop, iphone, ipad, android table and android mobile. Today, the user can login in corporate wlan simultaneous (with same user/pass) in all devices. The cust...
I have a bunch of 1242 access points that we replace with 3500s. Does Cisco have a good program to reuse these devices? We tried trading them in but for some reason it never pans out.Sent from Cisco Technical Support iPhone App
Installing 27 of these at one location and have found one that will not boot. When you console into it and reboot the AP there is no console info.
Hello,A customer has RADIUS running on a Win Server 2008 R2 machine, has Autonomous 1140 APs and a mix of Windows 7 and XP Pro clients. Using PEAP as the authentication method the Win 7 clients can access the WLAN, but the Win XP clients cannot. Th...
We have a WLC 2504, since a few months, it was working fine, we have a guest Wlan configure with web authentication and the DHCP scope for this in the WLC. The problem today is that its no redirecting the web browser to 1.1.1.1, we try it with 3 lapt...
Dear experts:I want to disable the MAC authentication that is configured in my Aironet 1200 Cisco Access Point, now set to "Local list only". I want that any wireless device can connect if the user knows the wep password.I cannot find the option to d...
We have installed a WLC440 at a school with 30 1131 APs. Only 3 showed up under Wireless tab, and others became rogue APs. Where and/or what do I need to change on the configuration for others to join properly? Have matched the configuration on this ...
Hello,I have a wlc 2504, several indoor 3602i using Cisco 7926. The APs are in flexconnec mode, signal looks good from the 7926 site survey too. Good coverage anywhere from -50 to -65. I can be standing directly under an AP and the 7926 will loose ne...
After upgrading our Cisco MSE to 7.4, the appliance does not stay connected to the network. Once the appliance is restarted, layer 3 echoes occur for about 2 minutes and then stop. The only way to get it to respond again, is to restart the applianc...
Hi, From the document, it said only 50 AP supported in each branch for 7500. My case is the HQ has about 100 AP and other BO has less than 10 for each. I am planning to deploy 7500 in the DC and all the AP are in flexconnect mode. ...
I have a customer that has an air-lap1142. He says that it boot to Rommon, and he has to issue the boot command to get it to boot. What is the rommon command to have the ap boot to the image automatically?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-17-2026 11:43 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |