Wireless

is it possible to connect Cisco Ap-1242AG with non-cisco wireless router to work as repeater?if yes can plz anyone to direct me to any guide or documentation  to do this?thanks in advance Andy

Hi experts,I have two dinasour APs that I need to fix. They are configured in bridge mode to bridge a few VLANs between two sites. Right now the management IP on BVI 3 interface doesn't work. Does it have to be on BVI1 for it to work? When I say "wor...

Hi I need know how many clients can associate for this AP model AIR-CAP3502I-A-K9 AIR-LAP1131G-A-K9I have 45 clients currently associated with each AP.Thanks

It seems that oncea client has a certificate, they can attach to any SSID that uses cert based authentication. Is there a way to limit a certificate to only allow acces to a specific WLAN/SSID?                  

Dear All,I need a basic explaination on setting up the following controller:Cisco 5508 Series Wireless Controller for up to 100 APs802.11a/g/n Ctrlr-based AP w/CleanAir; Ext Ant; E Reg DomainFor Mobility i want to settup the device such that the SSID...

Client has a building that is located 300Ft apart and would like to provide IP communications for 3-4 IP hadsets back to an IP PBX.   They do not want to dig up the parking lot so we proposed using a wireless bridge.   I noticed that Cisco discontinu...

Hi,After I initial MSE with the wizard. MSE take so long to start the service (more than 1 hour) with "Starting MSE Platform, waiting to check the status"Then I decide to reboot the appliance, after that MSE shows the message "Traceback (most recent ...

Hi,after an upgrade of NCS 1.1.1.24 to CPI 1.2 on green field, it was not possible to reuse the GUI.  During the upgrade, I''ve shortly seen an oracle DB error, but the upgrade was going through, without problems.At the end, it was not possible to us...

Hi Experts,We have 3 different AP1552 in sama AP group. we can reach all of them via controller. None of them have alarms on ita nd they have the exactly the same configuration.However, only one of them broadcast SSID, other AP's does not broadcast S...

We have a core switch ( 3750 ) , a wireless lan controller , access points , DHCP/DNS/AD server.Ssid's configured on the controller need to be authenticated with username & password, but the database of authentication needs to be in a radius server c...

Is it generally a requirment to support both WPA and WPA2 for enterprise?Sent from Cisco Technical Support Android App

i would like to ask if a cisco aironet 1162 access point can work without those antennas as well as an access controller.thanks in advance

Hi Members,I have a Cisco Flex 7500 in my datacenter and I need to connect 100 sites , each site with 2-3 APs , each side has its own network and is independent of other sites , the site only need to comunity locally and do not need to access any cen...