Wireless

Wireless Client 10.150.0.12 pings 172.16.50.100 (Windows 2003 Server with dual NICs on same subnet, same default gateway), reply is from 172.16.50.101, will the WLC drop the return traffic to 10.150.0.12?We notice wireless clients can't ping this dua...

Hello,I have a problema that is driving me crazy, I have a Cisco WLC 2106 with 4 Access Points Attached to it, and my network goes crazy some times, here is an example of a PING to my ASA from a Wireless station:PING 192.168.1.1 (192.168.1.1): 56 dat...

I'm wondering if I am understanding this correctly.  If I place a 3502 in sniffer mode, reboot, and assign the channels I want to sniff, and configure the Wireshark host IP, does the access point act as a promiscuous WLAN adapter?Thanks in advance!

I have some users getting new laptops that thave a Dell DW1501 half card adapter that is giving me problems connecting to the wireless.  Runnning 7.0.116 on the WLC and 1252 APs.  Using WPA2-PSK and the clients show they are associated and authentica...

Hello All,I have a WLC4402 nad have been using it internally for approx 4 years with ACS authentication. Everything is working great.I am now truing to use the second port for a Guest Wireless setup running under a seperate VLAN. I setup a PIX 506 fo...

Hi everybody,I have a litte understanding problem with the deployment of EAP-FAST.So here's the deal:I want to the deploy EAP-FAST with autonomous APs with an ACS as Authentication server. So far so good.When the ACS is not reachable, the autonomous ...

Hi Guys,I am running three Cisco 1252 stand alone Wireless Access Points in my organization. I have configured three VLAN one for management and other two VLANs for different SSIDs. DHCP Server is running on Cisco 2901 router. Many user complained th...

Hi,We have a WiFi contoller based solution, the users don't have layer 2 security only layer 3 web authentication, this authentication make a query to a Radius ACS and the radius ACS is integrated with a Active Directory, the users database are in th...

Hello,I have a problem with my router 861w and I don't know from where is this problem. The situation is like this: I have attached a hard drive on one of the Ethernet port of the router and I'm accessing this hard drive thru my laptop which is wirel...

The Apple IPhone running Cisco Mobile 8/8.1 has roaming issue:We are using a 5508 (WiSM) running 6.0.199.4 code. The AP's in the area are the 1142 and the 1232. the SSiD has QOS set to voice/Platinum. Cisco (and ASCOM) phones are working and roam jus...

I have a few APs that keep doing this where WCS generates alarms saying that the AP is down and a/b/g interface is all down. If I check the WCS, I see the AP up for more than 10 days or so but the CAPWAP is up only for 4 minutes. Eventually clients a...