Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
hello experts!!!we have three 1505 ap which are really giving me the p.i.t.n. (pain in the neck).i'm trying to connect them to a 2106 wlc sw 4.1.185 bl 4.1.190 and but they don't seem to communicate with the controller. there are no messages after de...
I was wondering if using an AP such as the 1252 or 1140 will increasse 802.11g signal coverage, or are these radios going to be the same as using an 1130 or 1242?If the 1252 / 1140 AP's do increase the signal coverage will the client be able transmit...
Hi allI have a large warehouse with 10 autonomous 1240 ap's they are running 802.11g. Thye sometimes complain of lost signal even though we had a survey done, the ap's are all along the back wall. what settings should I put on them, it seems that mos...
I have 1310G with integrated antenna(EU version, max output power is 5mw.Is there any way to set it 30mw?If I use external antenna EU version, it can be set to 30mw.
Hi, I have a cisco wireless controller 4402 with 1020 LWAPP access points install. I did an upgrade of the software to 5.2.178.0 today. I got and error and reset the sytem. Forgetting that the access points may have been updating their software. No...
I setup LAN-LAN bridge in my lab. with 1310(integ. antenna)iperf.exe test results maximum 13 mbit/secany idea?
I have access-point LAP-1242 and i want to upgrade it to autonomous. I am using the standard procedure by pressing the mode button and using the following software image c1250-k9w7-tar.124-10b.JA3 and renaming it to c1240-k9w7-tar.defaulteverything i...
I have 2 new 1410 wireless bridges on which I can not establish a wireless link using 3ft Andrews Parabolic antennas (33db gain) over a distance of about 17.7 miles. I am running the radios in autoinstall mode, have verified the azimuths and perform...
Hello! I have a wireless controller 4404, running 4.2.176.0 code. I have LAG enabled but currently have only 2 ports used, I am planning on connnecting the other two ports soon. Will this cause an outage? I am thinking no, but I want to see if anyone...
Hi,I have to install an a print wi-fi on my network deployed with Access-point 1248.Can I do it joining mac-address printer to my AP ?Anyone does advice me an a document about ?Best regardsLorenzo
I need to integrate 4402 Controller with Active Directory.If I have two distinguished names, can I use two OU like:OU=HQ,OU=Branch1,DC=DC1,DC=comIs it OK???shall I use spaces between the patrs?Please any useful points I should consider them?
Hi, i have a wlc 4402 and a server Proxy, the wireless clientes cant access to internet, the proxy permit acess the ip`s of the clients, but for any reason the wireless clients can`t acess to internet, but can ping the proxy, any idea to fix that ?
I am trying to figure out a way to do a Guest Network without using an ACL tied to the SSID. (Customer's request) Its a layer 3 network and they suggested creating a DMZ zone off their ASA and connecting the WLC there that way its outside their netw...
Hi,Getting the following error message when I try to join a LWAP to my controllers in california. it then joins my controller in virginia and works...any help would be appreciated.Set Transport Address: no more AP manager IP addressesremain%LWAPP-3-...
What is the diference between WCS-APBASE-50and WCS-PLUS-50 ?.Thanks
