Wireless

Hi all, i want to implement a solution for a service provider, the ISP want to distribute the access to the internet in the Hotels, Parks, malls, etc and he want that the users can get access paying with a credit card, with a subscripcion or with a p...

I am not to familiar using TFTP to upgrade the IOS on the Aironet access points as I have always done it via the GUI. I have Solarwinds running with my IOS in the root dir and the AP connected via console cable. Everytime I attempt to upgrade via the...

I am trying to configure WPA2 with 802.1x authentication through ACS 3.3. Having issue with using PEAP authentication through ACS 3.3 configured for Novell NDS as External Database. Client is stuck "Verifying credentials". Controller sends authentica...

Do anyone got any knowledge of Symbol & how they fare in marketplace vis-a-vis other more well-known players ?

I have three Cisco 1310 bridges, one root and two non-roots. I have posted my config below, br1 is the root and br2 would be the non-roots.My goal is to carry 4 VLANs across this bridge, however with this config I get "Uplink to parent failed: Unsupp...

APs get IP addresses, but VLANs do not work. Switches look ok with trunking, etc. The SSID works, I get good signal, but no IP, via DHCP or hard-coded. It did work at 1 time, but no longer.

The 4400 will not respond to a ping from a PC workstation on it's management address; is that normal?

I only have 1 Wireless laptop connecting to my 1131AG with latest firmware. I keep seeing this in the log.Interface Dot11Radio0, Deauthenticating Station 0013.cecc.8e16 Reason: Sending station has left the BSS It loses connection off and on.Any thing...

We're seeing a lot of 350-series APs (with updated IOS ver 12.2(15)XR2 from VxWorks) with interface resets on the Dot11radio0 interface.Can anyone explain what causes an 'Interface reset' on the Dot11radio0 interface? What happens to wireless clients...

Hi. Do any one now if the wism card is supported by cisco works

Hi there,Currently I have 3 Linksys wireless routers one on each floor of our office.WRT54G - Wireless-G Broadband Router However, they are not working very well, and continuously dropping connection.We are looking for a more corporate robust wireles...

Is it possible to secure the configuration of wds ?I have configured two ap´s with wds. Priority is set to 200/199. So the AP with priority of 200 will be the wds master. What happens if a new ap will be installed configured with wds and priority of ...

hello, is there a another way to query the AD besides installing CSACS in a member server or using a remote agent? if yes, how do i go about it?thanks.