Wireless

I have been trying to get someway to access the BBSM from internal networks.We have a dual vlan config with a management and a guest network. I can manage it fine from the webGUI in the management vlanWe have two problems here1) Basic access from the...

I'm installing a new WLC2006 and the AP1020's are connected via the switched backbone and not to the controller. I upgraded the WLC to V3 code. Wireless clients do not receive DHCP addresses for their respective VLANs. If I connect wired to the switc...

Hi,We have an AP1200 (port 1) attached to a switch cisco express 500,in this switch we are using a Vlan and we have a DHCP server.The problem is when a new PC tries to connect to this AP, it takes to much time to assign the IP address, and in other c...

I have a wired network w VLAN of networks, 192.168.10.0/24, 192.168.20.0/24 and so on. Is it possible to implement?I have configured according to the cisco example document, but never able to get IP address even though i have set it to no open authen...

We have a legacy 900 mhz wireless network and are upgrading to 2.4ghz. Any known issues running the 2 at the same time.

Hi all,I have a wireless bridge between two buildings with 54 Mbps link. However theres around 90% packet loss between the two sites. What would be the best way to take care of packet loss.Any wireless experts..?Saurabh

I have changed routers and did not write down the IP address of my Cisco Aironet 1200 series WAP. The AP is mounted in the attic and is not easily accessible. How do I learn the IP for this address, so I may access the control panel screen? Thanks.

I have an ap1200 connected to an 1812 isr that won't translate domain.names. I can ping an ip address from the 1200 and the 1812. I can ping a name, www.ebay.com, ok on the 1812 but not on the 1200. I can ping the dns servers from the ap1200.Any idea...

Can the 1200 wirelss access-points be configured to authenticate using two ACS servers;1x server (current) - for current operations (leap)1x server (new) - for (peap) migrationI am hoping there can be some sort of priority such as the laptops that ar...

Hi All, following Scenario: Customer wants to Broadcast one SSID, within authentication against Radius (Free Radius) the User should be moved into another, not broadcasted SSID with a separate Security Policy. Is such a scenario realisable? I know th...

Hi,Just wondering what to register my DNS as for the WiSM, I currently have controller 1 as CISCO-LWAPP-CONTROLLER.<domain> etc, and all works fine, but now I want to register the second controller so that I can use the DNS option and not the Option ...

Hi,We'd like to configure an ap 1200 via console, we've got the message "Press RETURN to get started!" but we can't see the prompt, we can't type any command.We can access the ap via http.Any idea ?

Hi AllI detected that a [ (and probably other signs) create an Error 500 in the WLSE if entered in the password field of a configuration template.This error probably also happens with other fields and other sites.The whole error message:Error: 500Loc...

Hi,I was looking in WLC Release 4.0 Command Reference and it is saying the WiSM does not support any DEBUG commands !!!Is this for real?How long before it gets them?See,http://www.cisco.com/en/US/products/ps6366/products_command_reference_chapter0918...

Hello All,Could you please let me know that where can I find RF information from scratch to depth. Because my clients are facing RF problems in their premises in US.I do not have any knowledge in RF.Regards,Khan.