Wireless

What Ethertype number should i use to filter the linktest packets on the Cisco Aironet 350 series bridges and access points ?

I have a network using Cisco 340 Bridges. One of the 340 bridges crapped out and I need it replaced. It seems Cisco replaced the 340 bridge with the 340 bridge and my Cisco distributor (Ingram Micro) informed me that the 350 bridge will not work wi...

We have a network of eight (8) Cisco 350 Access Points.We would like to enable security through WEP and designating specific MAC (Hardware) addresses.Please advise as to the most efficient manner of inputting hardware addresses into all of our access...

Hi,I am using 1200 series 15 APs and getting the following error message once in a while (once or twice a day) on most of the APs.Network Bridge Loop: Received packet from Self destined to [AWC Mcast AP-Only]014096ffff00 on port "emac0" There are abo...

I am trying to upgrade the firmware in my client adapter (4800/350) to 4.25.30 from ACU 5.02.005 and have installed drivers 8.2.3. Regardless of what I do (uninstall, re-install, reboot, etc), the end result is that the ACU freezes after the "Erasing...

I have a *SMALL* WISP service that I use the 1200 for my AP. Is there a way to limit my subscribers to 128, 256, 384, 512Kbps, etc?-Jay

We are getting the following error on non-root bridge. The bridges are setup to communicate with MIC, TPIK, and Leap. We are not able to setup WEP on the non-root once leap is enable. Is this message something I should be concerned of? I am able...

Hi, I am trying to set up 802.1x on a Catalyst 4006 with a Supervisor III module with IOS 12.1(12c)EW1. I am using Cisco Secure ACS 3.0(2) Build 5 for my Radius server. I'm using the Windows 2000 802.1x hotfix for my 802.1x client software. My goal i...

I am trying to find documentation on the features of wlse software 1.3. I am currently running 1.0. Does anyone know the whereabouts of the release notes and steps involved for the upgrade. Any help will be greatly appreciated

I have a 350 AP (v12.00T) setup for Network-EAP. When I try to associate with it I keep getting "EAP retry limit reached for Station". I've sniiffed the ethernet port and the AP is not even trying to contact the Radius Server. Anybody have any idea...

I would like to develop a report package for Cisco Wireless device using the SNMP (MIB Objects) access. Can anyone suggest me what are all kind of report i can produce ..?Like, CPU Usage, Memory and Buffer Usage, Process utilization and Conne cted N...

hi engineers ,i want to use 1200 access points in my local lan and 802.11a 5ghz standards so i had search over cisco equipments .my problem is that i have found access point and client adapter but i still looking for pci card for pcs not notebooks.pl...

Hi,How to monitoring latency between two wireless points (WWAN)?I would be grateful if you advice me.Best Regards,Mehrdad