Wireless

Hi all,Does anyone know if there is any way to adjust how many beacons it takes for a device to be displayed as a rogue in device faults? I've been all over the settings area and cannot find anything regarding it.WLSE is version 2.9Here's what's happ...

Hi,need help. I have been tasked with a wireless project which entails connecting 8 satellite sites to ADSL through wireless bridges. I have installed a cisco 1751 with a 4esw card and an adsl port. Satellite sites have not to be part of my current n...

HI, We are planning to introduce a big WLAN, with 1200 AP, we´ll work with them using a RADIUS Server and 802.1x, here all is Ok, but the problem is that any user can connect its AP(Linksys, anything else), it is a big hole, we don´t want that. Do yo...

We script our AP1200's which have been converted fron VxWorks to IOS. The tacacs-server host X.X.X.X key xxxxxxxxxx entries (we use multiple tacacs servers) are in the config.txt file, startup config and running config file. The AP performs tacacs au...

As I understand it a 5.2dBi antenna focuses the radio energy as compared to an isotropic radio. what i'm curious about is... does a higher gain antenna (5.2dBi ) have a created receive sensitivity aswell than a lower gain antenna (2.0dBi)?

what happened to the site survey that used to come with the 350's,,ACU' ?? this utility is very important,there must be another utility that cisco offers to do site surveys with the CB21AG wireless cards ??? what are my options then for site surveys ...

I have a prototype wireless lan in place using WDS, LEAP,TKIP, MIC and key rotation. I'm using a combination of Centrino enabled laptops along with some Cisco 350 PCMCIA laptops. I am also authenticating to a TACACS+ 3.3 server. We now want to use th...

I have a question regarding best practice recommendations for Cisco Wireless concerning Clients...I have Cisco 1200 Series AP's with IOS Version 12.2(13)JA4. Currently I have Administrators authenticaing for Admin Access via TACACS+, for both http an...

OK, I am stuck.Have an Ap1210 that I need to have at least 2 secured vlans running on. I have configured the ssid's and associated them with individual vlans. Also have the bridge-groups defined and the associated sub-interfaces on the Radio and Fast...

Hi,I'm having a problem achieving good performance on a Cisco 1200 AP [802.11b] which supports about 15 clients. It's been configured to allow only 11MB & 5.5MB access with static WEP & w/o SSID broadcast. But somehow the performance is way below sat...

How many ip wireless phones support Access Point?

Hello group,I have wireless bridge 350 and omni antenna--AIR-ANT24120( 2.4 GHz,12 dBi Omni Mast Mt. Antenna w/RP-TNC Connector). I want to know:1. How many low loss cables do I need between bridge and antenna for each bridge?(one or two)2. How many l...

Hello, Can anybody tell me that the Cisco Aironet 350 Series Access Points can support how many clients at one time?Thank you.