Wireless

I'd like to know if these is any sotware tool to check performance in a building to building connection (with aironet 350 bridge).Now I'm timing the transfer of big files from a bridge to the other, but I want to find a more powerful tool (if possibl...

Can anybody confirm or deny whether the firmware for the 4800 can support 128-bit WEP please. We've been told by our supplier that they don't but it seems that from firmware version 8.55 onwards at least, there is a privacy option under the 802.11 pa...

What is the latest firmware for Aironet Access Point 4800? The exact model is Model AP 4822B. If you have a link for the latest firmware and the latest ugraded documentation are appreciated. Here's the current info on my AP4800.System Firmware: 10.1...

Having an issue with 2 BR350 wireless bridges. The two units infrequently give the following report, Disassociating Sender is Leaving (has left) the BSS"And the link is disassociated.Any idea why this occurs? Firmware bug? Radio problems, the link sh...

I have a wireless network with 350 AP and 350 Workgroup Bridges only - no mobile cards. The WGB's have "dumb" devices ( time clocks - bar code - etc. ) that do not login to the network. Can LEAP be set up so only the WGB devices and AP authenticate ...

Hi, I have 2 CISCO PCMCIA Card 350 Series associated with an AP-350 ( 50 mW).I have no problem with this configurationBut when I want to use an old CISCO PCMCIA Card 340 Series with AP-350.The card is not Associated. The SSID is correct, and i have u...

I read up on Cisco's site that you can alter the 350 Series Bridge to be an Access Point. I own the "rugged"350 Series Access Point, which largely resemblesthe multifunction 350 series bridge, and was wonderingif there was some way to make it a brid...

I am having a 1200 ap working in .11b now but in future i want to migrate it to .11a.but as of now i couldnt see any antennas or client adapters that seem to support .11a.plz suggest.If i am having 5 ap's in one floor say why cant we reuse frequency ...

I'm going to test two cisco aironet brigde with 21dB solid dish antenna to connect two buildings.But, as first test, I want to config everything in the office, without mounting antennas. Is it possible to turn on the bridge without antenna or this wo...

I have 2 units of 350 bridge, and I have the information on how to default the bridges back to its default setting, but before i do that, may i know how can i confirm the firmware/software version of the bridges ? Kindly assist.Thanks

My company is providing internet service to an apartment complex. The connection to the internet provider (UUNet) is through a 2620 cisco. The router feeds 1900 switches in each building. What is the recommended settings we should consider in the rou...

hello!I would like to get the cpu utilization of the 1200 AP with SNMP. Is there anybody know what OID i have to get ?

Hi,What the element the CiscoSecure ACS is based to derive session key for LEAP? Is it the reason that standard Radius server cannot be used with LEAP since it does not the mechanism to derive the session key for LEAP?Thanks,Cliff

I'm setting up 6-10 wireless bridges (Aironet 350s) to connect segments together with no one being the "main" segment. There will not be any clients associating with these bridges. The manual says you must have one Root Bridge and shows a point to m...

Hi !I was reading the IEEE 802.11 spec and now i'm wondering if the Cisco APs do PCF (Point Co-ordination Function) or just use DCF (Distributed Co-ordination function)I was unable to find anything in the Docs or on the AP interface...Thanks for any ...