Wireless

Cisco 350 card in Win2k SP4 laptop with current driver is constantly switching between two 1200 WAPs every few seconds, even when the laptop is moved directly under one of the WAPs. The WAPS are 802.11G radios with latest firmware. Any ideas?

All,Have our first 802.11b installation up and running. Using mobile PCs with integrated barcode scanners from HHP (model Dolphin 9500) for a warehouse management system.Any suggestions on what config parameters on the 1200s to watch for to get optim...

When cisco will add support of 1300 series AP for the WLSM module? It is very important for us since we would like to use these AP together with WLSM.

I have a Linksys Router BEFW11SR that my high speed internet connection is connected too... I would like to expand my network to an upstairs home office using the Aironet 350.. I've connected everything up and have set the SID to linksys and they sti...

Is there an easier way to get the logon prompt to pop up automatically instead of having to click on the network connection icon in the task bar when using PEAP (with OTP) on Windows XP machines. I don't have such problems with W2K machines.Thanks.

This may be a bit of a stupid question but here goes anyway.I'm doing a wireless site survey and NetStumbler has discovered a few "peers". My understanding is that a "peer" in their terms is a client that is set in ad hoc mode. Will this client cause...

I do not have a radius server and I'm try to get my WLSE to manage my wds ap (1200). I have local radius running on the wds and other ap's are registered to it, but not the WLSE. Is this possible? Or is it a problem the local radius works on ports 18...

I am trying to set up PEAP-MS-CHAP v2. I am using Windows 2003 with IAS, Cisco 340 AP with 12.03T, Cisco 350 Wireless Card, Windows XP SP1. After logging with wireless user account, it connects, authenticates, and associates with AP for about 5-7 sec...

Hello all, Here is a peculiar problem for me a. I have got CISCO 350 Wireless LAN adapter for Ipaq Pocket PC 2000(Win CE 3.0)...AIR - PCM352 to be precise.. b. Yesterday, I was able to connect using through the wireless access points... and the devic...

I thought I would share the solution we found.Enviornment,Mixed hardware clients, all WIFI compatible.Cisco 1231 AP'sCisco Secure ACS for windowsWPA with PEAP Problem,Clients utilizing WinXP SP2 and wireless zero conf were not able to connect to our ...

With 2 sites using two 1300 bridges as a wireless link between the 2 LANs, what is the best mode to put them in if I only want the wired traffic to pass....not other AP's or Clients?

All,Can someone please explain the deauthentication reason below from my 1200 event logs:Reason: Previous authentication no longer valid.What causes this? I'm using non-Cisco clients - is there a specific inactivity time out that causes this?Thanks!

Hi,As per my understanding the 1200 Series Access points running IOS (12.2(15)XR) send the management traffic (RADIUS,Accouting NTP etc) un-tagged i.e. using VLAN 1.As per our current setup, we assign this un-tagged traffic to a different VLAN (by ch...