Cisco Community

Risks involved with enabling 802.11ax?

Hello All,I have been looking at recommendations to enable 802.11ax in our retail wireless network. I have read about all the rewards around enabling the feature. Our deployments are typically in malls with lots of surrounding chatty wifi interfere...

Cisco Cube and Genesys CX - Setup TLS connection

Hi all,I'm trying to configure a trunk between my Cisco CUBES(ISR4431) to Genesys Cloud for a new implementationHas anybody made this challange ?It works with SIP/RTP and SIP/SRTP but when i switch to SIP with TLS it fails.TLS Handshake between Cube ...

Recovering an AIR-AP2802i: no space left on device

I'm playing with Mobilty Express. It worked great with 4 APs but now I'm stuck with a 2802i. I tried to convert it to the mobility image but it failed. Now every time I try to install a new ME or CAPWAR-Image I get #ap-type mobility-express tftp:/...

802.1x wired profile

Hello, i was successfully create 802.1x with certificate authentication to access to the network. For wired I must configure the authentication tab on NIC properties, however i want to push the wired profile from Microsoft Intune but the profile seem...

Prevent CBD from pulling in unwanted devices

I have a similar question as this old one: https://community.cisco.com/t5/cisco-business-dashboard/stop-autodiscovery-just-monitor-static-devices-in-inventory/td-p/4568247I don't necessarily need auto-discovery turned off, but I do want it to stop at...

Upcoming name change for several data center regions

As Cisco Secure Access continues to expand with new data centers around the world, we periodically update regional groupings and region names to better reflect the available data center footprint.Three Secure Access regions have been updated to a hyb...

QoS best practice

Hi,What is best practice config / design for QoS for data center switches? These switches are connected to servers and distribution switches.Should they be configured with as many DSCP as it could be, or let's say 5 would be enough? How about "auto q...

API - Wrong scope ? getOrganizationDevicesMemoryByDevice

Hi ,To whom ever reads this ( hi Oren )Is this expected that this call getOrganizationDevicesMemoryByDevice is named like a org-wide call but needs a specific networkId ?Whenever I see a getOrganizationXYZ call , I never expect to specify a network....

SDA Wireless Connectivity Issues

We are running wired & wireless SDA at one of our facilities. Seems to work fairly well. In the last couple of months, we've been encountering some weird wireless connectivity issues. At completely random times, wireless appears to drop in random are...

Breaking into Networking with No Experience

Hi everyone,I’m a fresh graduate and pursuing networking as a career path and preparing for my CCNA exam. I have good understanding of network fundamentals such as IP addressing, subnetting, routing, switching, and troubleshooting, and I’m actively i...

OpenDNS Outage

Curious if anyone else on East Coast notice about a 20 minute outage with OpenDNS around 2:40 PM today. Support is saying everything is fine, but our two nodes could not connect to the Umbrella DNS Servers .Our ISP was up and we could ping IP address...

Seeing ep mac address detached and attached in ACI

Hi All.I am seeing 2 mac address in my aci switch has been detached and attached. 1 mac address happen around 260 seconds and another one is 780 seconds. I want to know what happen to the mac address in the ACI? is it being aged out, deleted and why ...

Login to WLC Using Https

We have already implemented TACACS+ in order to log into the CLI of our WLC using our domain admin creds. We are looking to do the same thing for web ui of the wlc. We already tried going under AAA Advanced and setting authentication and authorizatio...

9300x-24Y MACSec with GLC-TE

Hello everyone,Does anybody know if there is a limitation regarding using MACSec (CTS to be exact) on 9300x-24Y downlink port but with using GLC-TE modules. In the official documentation i cannot find anything, but when browsing i find that GLC-TE do...

RX-SOP Design Considerations for Mixed Handheld and Laptop Environment

Hello everyone, I am currently facing a somewhat complex wireless design challenge in a warehouse environment and would appreciate feedback from the community. Environment The customer requires wireless connectivity for two very different client type...

Featured Content

Cisco Insider Champion 2026 Application: Now Open!

Beyond the Badges: Meet Marcelo, a Cisco Community Legend

Cisco IQ is now Generally Available

Excellence in Action: Announcing Our New Spotlight Awardees

Community Activity