LISP on Nexus 9k

Does the Nexus 95xx or 93xx support LISP?  If not, is there planned support? 

using ISAKMP through 3 router

im a newbie and student that currently still learning about the cisco, im trying to use ISAKMP to allow access between 3 different network for my assignment but i can only ping to the router instate of the end device, only the hq network can ping eac...

Cisco 9500 License

Hello,I have C9500 with Essential license and this license not support for stacking. Can I upgrade existing essential license applied on the box to Advantages to support virtual stacking?What SKU should I purchase?If i'm only upgrade the DNA license ...

POAP USB N9K

Hi everbody,i try poap usb with a N9k 10.3.5m NXOS. With paop script from git.nexus9000/nx-os/poap/poap.py at master · datacenter/nexus9000 (github.com)After some troubleshooting i have changed poap sriptline 1075 copy_src=os.path.join("/usbslot%s" %...

VXLAN EVPN in Multisite

HelloI'm asking because I have a question while studying Multisite.Is there a way to configure BGW not to use Multisite, but not to affect the VTEP scale, which is the advantage of Multisite?

Geolocation data not showing after uppgrading FMC to 7.4.2.1

Hello, After upgrading a coupple of FMCs to version 7.4.2.1, we noticed that the "Initiator Country" on the connection events page no longer show any data. We tried to manually update the GeoDB file, but we still not seeing any country information. H...

Detailed Sip message not showing on RTMT

Hello all, I have a cucm pub and sub v 14 , i have a problem the detailed sip message not showing on RTMT .I checked  Sip call processing trace  is enabled , and the debug trace level is set to state : detailed on the pub and sub .You can find below ...

Site cannot be updated as site or its parent has network profile assoc

Hi, I have removed all the network profiles associated but I still cant add a building to a site in the hierarchy level... I'd rather not delete the templates I created but I need so add some new sites "Site cannot be updated as site or its parent ha...

VRF and redistribute connected command.

Hi guys,I currently have a router that doing EIGRP, below is its EIGRP:router eigrp Prod!address-family ipv4 unicast autonomous-system 150! topology base   redistribute connected    redistribute static exit-af-topology  network 10.10.10.0exit-address...

Port Channel issue

CoreSW#sh etherchannel 13 summaryFlags: D - down P - bundled in port-channelI - stand-alone s - suspendedH - Hot-standby (LACP only)R - Layer3 S - Layer2U - in use f - failed to allocate aggregatorM - not in use, minimum links not metu - unsuitable f...

N9K-kernel log (KERN-3-system_MSG buffer_info[next_to_clean])

I'm facing with this LOGS.   %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx] buffer_info[next_to_clean] - kernel %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx]   time_stamp %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx]   next_to_watch %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx]   j...

Cisco 3650 stack random crashes - IOS 16.9.5

Hi, looking for any advice on solving this issue, any help would be greatly appreciated since I dont have an active TAC support account.I have a two member 3650 stack using IOS XE 16.9.5 that for the past 6 months crashes at random. It will be up for...

Cisco ISE OSアップグレード時における自動PANフェールオーバー機能の併用について

物理筐体Cisco ISE 3615 2台と仮想版Cisco ISE 1台の3台構成で運用しています。仮想版ISEをヘルスチェックノードとし、自動PANフェールオーバー機能を有効化しています。 この度、ISEのOSを 3.2 から 3.3 にバージョンアップさせるのですが、自動PANフェールオーバー機能を有効化したままで、OSアップグレードを行っても問題ないでしょうか。 アップグレードはGUI(Web)の画面から「 管理・システム > アップグレード > フルアップグレード 」を予定していますが...

Domain Name System (DNS) Guided Resource

Setup wizard not working for virtualized ISE 3.3

Hi everyone,While deploying ISE 3.3 on VMware, I encountered an unusual issue. When I entered the "setup" command, there was no response. I’ve tried resetting the VM, rebooting it, and even powering it off and back on, but the problem persists.All th...