Hello Does anybody suggest which way can I apply "show" and "configure" commands on the Nexus switches in ACI fabric (excepting the CLI, because we are having an enormous delay in the applying such commands over CLIs, and we're finding the workaroun...
Forum Posts
Hello,I'm trying to configure LACP bonding between a Windows Server and Cisco ACI fabric, but the port-channel is not forming properly. I need help troubleshooting this issue.Is there anything specific I need to configure on the ACI side for Windows ...
Resolved! ACI Endpoint IP list
Hello Cisco Expert team- Looking for your support to find the way to list down all the active endpoint IP address in the a command line. We are in the process of DC migration. Need to know the remaining active endpoint IP address in the fabricregards...
Could you please confirm if there is an official compatibility matrix that maps specific ACI Simulator versions to supported ESXi/vCenter releases? Additionally, are there any known compatibility issues(likeVMX drivers) between ESXi 8.0.3 and the ACI...
Hi we have a multipod deployment with Pod1 and Pod2, now custmer start to move wokload from Pod1 to a new location over the next months. for that we made a Pod3 on the new location.The question now is: when we have transfered complete workloads and L...
Hi experts,My client has a lot of L3Out, and all are using OSPF.I learned recently that they use a "trick" to create their backbone area:they configure a L3Out using area 0in the Logical Interface Profile of that L3Out they configure 2 vPC so each Bo...
Currently, we are using route leak to allow certain EPGs from user tenant to access mgmt tenant as vCenters reside in there. But there is no access control as it's just routing per see. I am trying to get rid of the route leak and force such cross-te...
my APIC server is stuck - doesn't load the operating system. when I try to start the installation via the KVM vDVD - the setup doesn't load. when I try to mount via CIMC - using CIFS and HTTPS - the setup doesn't load when I try to use Disk on Key ...
Hi AllThis bug CSCwo65772 was created Date on Apr 01, 2025And from Documentation , Cisco Nexus Dashboard Fabric Controller - Event Analytics, Release 12.1.3 - CiscoSMTP servers with Start Transport Layer Security (STARTTLS) are not supported.Did this...
Hello, I have a question regarding Cisco ACI. A customer asked why a duplicate IP fault is appropriate when two different MAC addresses are registered as endpoints in the same EPG for the identical IP address. Based on the ACI fault search tool, I fo...
Resolved! Loop in ACI
Hello Guys,I am new to the Data Center Knowledge and I wanna ask, can my server guys cause a loop in my ACI and would it be detected on my APIC Faults?I believe most of the servers guy play around without knowing the true effects of their actions.
After upgrading ND from 3.0.1f to 3.2.2f unable to validate/Save SAN credentials.
Step 1.To add our existing ACI environment we have to downgrade Leaf from version 15.2.8d to 15.2.7f then i will add ACI environment but So as per cisco document i used below command :(none)# touch /tmp/install_in_progress(none)# copy usb/usb1/aci-n9...
hi guys! I’m working on a multi-site infrastructure and talking about "single site EPG/BD" vs "stretched EPG/BD" our first idea (as per best practices) was to create 1 Schema and 3 Templates as per the following: - Site A Template (site association -...
It appears, at least with our configuration, that the port-channel numbers across the leaf switches in a vPC pair tend to not match.For instance, a given vPC might be Port-channel7 on Leaf1 while it's Port-channel3 on Leaf2. Sometimes they do align b...
