Hello, Need help with M4 (C225 M6) loading APIC 6.0.2h. Have both 1gig onboard and Intel 10/25g SFP NIC. CIMC doesn't show VIC nor Intel-NIC option under CIMC|Networking. The issue I have now is APIC can't detect adjacent Leaf Switches.is it firmwar...
Forum Posts
I would like to know the process to download or export the Cisco APIC leaf and spine device inventory.
Hello,Does ACI use any protocol when it communicates with the vSphere? Or it's a normal tcp handshake on specific port number?
Hi @team,I'm new to Cisco ACI technology and recently i have made a setup ACI Lab Setup in Devnetsandbox ,after that i don't know how to launch the Lab setup.Could you please guide how to launch the lab to learn. Thank you
Listen here: S10| E30 VMM Integration with Nutanix enabled by the new ACI 6.0.3F release Virtual Machine Manager (VMM) is a popular Application Centric Infrastructure (ACI) feature integrating network fabric operations with a virtual machine domain, ...
Hi, I have managed to link ACI 6.0.3 with vCenter 7.0.3.Integration works fine at Folder + DVS level.VMM controllers are online and they retrieve all vPG and virtualized hosts and their vNIc, and all the ESXi nics..The problem I am facing is with the...
We're starting a migration to ACI, and starting with an EPG extension to connect the existing L2 devices. My problem is that some server owners would like to have their switch port set up as an access port, and the L2 out is a trunk. Is there a san...
I have two tenants (two different VRF's) and each one has different EPG's(different BD's and Vlan pool) and the gateway will be the active firewall and physically the active and standby connected to the two borders as vpc my question : - i will ext...
Dear All, I have a question on what is the best approach to allow communication between Two users in different VRF in Cisco ACI. I understand VRF Leaking can do this but is there any other way to do the same.
Resolved! Multiple VLANs on same port in an EPG
I am trying to put vlans 503 and 504 on leaf 101 port 1/2 in the web-epg. Why won't it let me? It says "already exists" but I can put another port:vlan combo in this EPG, I just can't put anything else on this port (Node-101/eth1/2). Also, if I go to...
Hi In our ACI (5.2(6e)) Fabric we have the problem that our VMs in VMware cannot boot with PXE. The VMs don't get an IP address from the DHCP server. With the DHCP Server everything is fine cause when i connect a VM who is already configured the mach...
Hi,I'm trying to configure the LDAP PROVIDER in APIC 6.0 but I didn't find "Bind DN" where I can put the username like in APIC version 5.2.I put it in the Base DN but I don't know if it's the right format. Someone can give an example format of the Ba...
Hi all,question about PBR configuration. Can we apply template to same EPG, for example EPG-A to be Provider and Consumer.Is this supported, what would happened if this scenario was applied in template?ACI is version 4.2(7f).Thanks,Z
Hey guys, I am trying to configure my aci to use ldap, but it's now working Now I already did it with another aci that uses the same ldap servers, I did it exactly the same and there are no reachability problems between the new aci and the ldap serve...
Hello community,I apologize, it will be a rather long text, but I think I have to explain a lot and will still be missing half of the important information :SWe have a single-pod ACI fabric: The leaf switches on the lower end of the diagram connect ...
