Hi, I already have implemented an SDA fabric. I also have branch switchs managed by DNAC.I have created 2 application policy (HQ_policy and Branch_Policy) which are identical. I have keep the CVD application application, I have only requalified 2 ms-...
Forum Posts
Hello, I would like to implement 802.1x on AP connected on Catalyst 9300.The method used will be EAP-FAST.I have directly configured the 802.1x credentials and the EAP-FAST on the Catalyst 9800 WLC and it works well. With the new DNAC version, it is ...
Hello, Our 9130 AP's fail to fully onboard. They're stuck @ 80%. We're running DNA System1.6.594. Our WLC are 9800-80 code 17.3.4. Please help and Thank you
Hello Professionals,We recently installed Cisco DNA (Stand alone) appliance. We successfully discover all Cisco switches. But few devices are not able to discover. Is there any list of compatible devices? is Nexus 7000 Switch compatible to DNA Center...
Hi all, Does anyone know if it’s possible to bring and existing SDA into a DNAC? We’ve got a customer that has a DNAC/SDA and has bought another company with a separate DNAC/SDA and they want to integrate the NewCo SDA into the existing DNAC. Best, ...
I would like to know if anyone has a reference or white paper comparing the following two DNA Center Wireless Assurance use cases:- Over the Top Wireless- Fabric Enabled Wireless It would be great to see a chart with Assurance features for each of th...
Hi community, In my DNAC I cannot see any traffic flows when: 1. under SGT policy -> pick a policy-> view traffic2. Under the Analytics, I can see SG groups and ISE profiles numbers, but click it in there is no traffic flows. I need to understand the...
Hello Pros, We recently installed and configured a DNA (Stand alone) appliance. We are able to discover only all of switches in our environment. When we run the PDART report we found some hardware compatibility for our N7K (Core Switches) and wireles...
Is it possible to temporarily disable monitoring on a device that may need to go offline due to a planned outage or maintenance? I'm new to this community, so in advance thank you for any replies and input. - JD
We are having a problem similar to the one described in https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvx86066 exception: Error in running XDE Procedure, Error Message::Error occured while executing the command 'Failed to fetch the preview commands...
If you wish to configure the settings of the extender network, you can use setup.ampedwirelss.com as the gateway to access it. You can always use the default IP address as the alternative here. Press the enter button and you will access the login pag...
Hi Community, I’m trying to setup External User authentication via Ubuntu Tacacs+ for DNA.However I cannot get it to work?! My tac_plus.conf is something like this; group = netadmin { default service = permit service = exec { ...
Hey guys,I have been trying to study SD Access and I am a bit confused in VXLAN. I know VXLAN tunnels L2 traffic over L3 infrastructure, so I get it why it is good in DC/ACI, because of vMotion. But in Campus network how it is beneficial, specially w...
Hello Team, We have a huge deployment of C9400s and C9600s as FEs and BNs, I would like to confirm if the support for Zero Touch or One Touch RMA is available for C9400 AND C9600 LAN Automated devices available in DNAC release 2.2.3.4. When i look a...
Resolved! Skipping application upgrade in DNAC
Anyone ever skipped application upgrade after system upgrade during a DNA upgrade and went directly to the next system and ended up with re-image situation?I know that you shouldn't skip such a step. It was a mistake. But is there any documentation ...
