Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Here is the scenario.Call enters to a 2821 voice GW like this:PSTN-->E1 PRI-->2821GW. Output of the 'debug voice ccapi inout' command shows that «Screening=User, Passed":*Sep 24 08:45:44.943: //879/7B9E71F1807B/CCAPI/cc_api_display_ie_subfields: c...
I hava install PUB first; name - cucumpub, IPAddres - 192.168.100.1 GW - 192.168.100.10 then try install SUB - ; name - cucmsub, ipaddress 192.168.100.2 GW - 192.168.100.10 I am not having DNS server in this installation, when I try to install SUB, ...
I have cucm 7.0Have configured a hunt group with 3 extensions.Have set the pilot for DDI.When I call in from PSTN. It only calls two extns. never the third. Does this all the time.If you call the pilot internally, it works fine.I can only assume ther...
Hello,How to configure the Script Editor in Cisco UCCX 7.0?Plz any one hve this materil share it with us.Thanks a lot.
Hi,I have CUCM cluster (1 publisher and 1 subscriber) and I have to configure SIP trunk to telephone provider.They need my IP address for SIP trunk. Subscriber is the one that is doing call processing (CUCM 6.1.2).Do I give them IP address of Subscri...
do CAD have any feature to seach list of users in the company like attendant console. cause when agent recieve call and need transfer it was hardly to click phone book buttom, in the attendant console application,they can list local directory from CM...
We are using CUCM 4.2. We have a route filter setup that contains a dozen or so country codes (like 876) that we want to block for outbound calling for toll fraud reasons. We then assign this route filter to a 9.@ route pattern and assign it to a par...
Hi,This is the scenario. We have a CUCM 7.0 cluster at HQ with remote site phones/gateways. There are about 8 Telco circuits (both T1 PRI and CAS) AT HQ. Each remote site is setup for SRST and has its own gateway with either a T1 CAS or PRI. Local...
One of our programmers wants to send a short pre-recorded message to our client phone.It is for .NET frameworks. Have anyone done that before???I mean I don't really care to use our CUCM system or 3 party vendor hosting service, we would like send t...
Is there a way through RTMT that you can proactively monitor the health of an intercluster trunk and set up alerts if the trunk is not available or unable to process calls?
Hi,Can I change 7975 display picture if I use CME?Thanks!Best Regards,Teru Lei
hi friends,i am facing one issue,i am having 2811 with 4 port fxo,my problem is if somebody calls to my office it is ringing ,but if they dissconnect the call also still the phone is ringing.if they send busytone also sameplz provide me the solution
Hi,I facing one issue one customer place, we are using 7816I3 Server, in this server we are seing one yellow amber light, so we restarted this server. After that we got like this error.Pls find the attachement, is there any problem in any hardware.pl...
Hi to all,i'm trying ro configure a 2801 with 2 bri interface for 2 isdn lines but the strange thing is that i can make call from an ip phone but i cannot receive call from external phones.The phone begin to ring but in the same istant on the other s...
Hi experts,I have configure an intercluster trunk (ICT), which is associated to a Route Group (RG) and this one to a Route List (RL). No more gateways or ICT in the RLFor some reason if I made a call to the route pattern #.5XXX associated to the RL I...
