Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
WHen we troubleshoot CUCM we can use SDI and SDL logs.What is difference ?
Hi,I am assisiting a Customer in trying to resolve a registration issue with a Gatekeeper Controlled Trunk in CCM.The gatekeeper (non-cisco) has provided a trace and shows the registration is failing due to an "Invalid Alias". The alias / h323-ID sh...
We have run across an obscure issue in Unity Connection that is by design I am sure, I just wanted to see if there is a way to modify it. When doing a self-enrollment and you get to the password portion, if you accidentally hit # without creating a ...
DearI have problem with VIC2B-S/T TE card (for ISDN BRI) which I try to connect to 2811 voice router with callmanager express.IOS version is c2800nm-advipservicesk9-mz.124-20.T.bin and Cisco Unified Communications Manager Express 7.0(0) version.In sh...
Hello - I use to have - http://ph one-xml.berbee.com/cgi-bin/weather.pl configured under services for our users to access local weather. It no longer works, I assume because of the Singlewire acqustion.Does anyone know of a good RSS feed to use for...
Our office is moving and we decided to change our VOIP infrastructure. Currently we have our Call managers passing the traffic to our router in the office. However that ISP is going to install a router at our office that will handle the VOIP to outsi...
I have built a 6.1.2 VMware image I have allocated a 36GB hard drive and 1024M of RAM. However the CCM service and TFTP will keep stopping so I cannot any phones to register. Any suggestions
HI Pros, I need help to configure a T1 line for voice in Cisco 2801 router.I have the card installed, whenever i try to install the pri-group, the router displays the following errors message1. Please configure Network clock participate wic 3 ...
We have Unified 4.21 (might upgrade to 7.0 later this year) with exchange 2003 (external).We have failover design (active/passive) now. In the very near future, we will have DR site.I think my question is that:Can Failover and standby Redundancy co-...
Can anyone share some information on how you do cme to cme meet-me conferening? Here is a scneario with two CME's separated by a T1. CME1 conference has 30 participants using pure G.711 codec and CME2 conference has 31 participants usign pure G.711 ...
hiwe are having 7906 ip phones.i can ssh to perticular ip phone but i am unable to login because i dont know default username and password.please let me know is there is any default username an password for ip phonepushpak
Hi,I have a hunt list and hunt pilot configured on CM6.0 to which users can log in and out of. Is it possible to set the system to automatically route callers to a recorded greeting on Unity when nobody is logged into the group?I can get it working b...
I have one voice router, to which I've attached two analog phones and a switch. To the switch I have an IP phone. The analog phones are talking to each other and configured fine. What commands would work on the router to enable the IP phone to commun...
Any knows that how to recognize the pulses on Voice Gateway/CCM to generate the billing records on run time.
HI Guys, Wonder if any of you can help. I am deploying a site of around 400 users with 7961's They use arc during the day but out of hours they want the calls to be routed to a BLF button on each phone. I can set all this up but my question is Is t...
