IP Telephony and Phones

I configured a FXO trunk port to a Valcom 9964 feedback eliminator. When I dial the route pattern associated with the FXO port on the Gateway there is about a second delay then I recieve a fast busy tone. If I sh call active voice compact I see the f...

Hi!I have a device that won't receive calls, will just start them. Do I need to configure a Directory number?Thanks,Ana

When I go into the CME GUI (192.168.10.1/ccme.html), I can log in, but when I try to open Configure > Phone, it will not do anything. At the bottom on IE, it says “Error on page” and when I click on that, the error it gives me is 'VoiceProfile i...

Hi,Is it possible to push a mandatory background image to the phones and lock the setting ?CallManager Express 4.1 Cisco Unity Express 3.1.1Cisco IP Phones 7941GEThanks !

Hi!I would like to know what is the best way to allow a device connected to an ATA to just be allowed to call the following numbers: 800 205 603, 44 179 381 4841.Thanks,Ana

Hello,I have a question about some voip/vpn configuration. I've got two sites that have 1760 routers with fxo/fxs cards that are going to be tieing the two phone systems together with a couple of voip trunks. These are secondary devices on the networ...

Guys,I have an upcoming upgrade for a customer from 5.1(3) to 6.1(2) and then soon onto 6.1(3).We have everything ready to go, except the customer is worried about the need to re-login all EM profiles. We have a LOT of phones.Is this going to affect ...

Hello,We have three H323 gateways configured in CUCM 6.1.2. The 1st and 2nd one are GSM gateways and the 3rd one is the Cisco voice router, 2821 with 1 E1 line. The problem we are encountering is that when the 1st GSM gateway is busy, calls are not h...

Hi,I'm in the process of carrying out MeetingPlace Express upgrade remotely via SSH.One of the steps is to transfer the upgrade file onto MeetingPlace Express.The file is in the a local windows pc in the c:\mpxupgrades directory.I get the following e...

Hello,If i use MGCP gateway and i apply DSP farm butcisco tell us to make the Gateway SCCP if we use call manager, I cant understand?

guys can someone please explain the difference between these protocols i am a new bee to iptel.....whats is the main diff and what is the purpose that we will select h.323 over mgcp or sip.....thanks guys in advance

Wrong Place - edited!Sorry!

Hi, we are experiencing an issue in Dubai.Could it be possible that a provider doesn't send the "Type of Number"? (e.g. National or International). If they are not sending this information, can i adjust the setting / command for "progress_ind"? Witho...

Getting DN error PG1A DN error and says to check log,any one can tell me where to find the log and why is this error comming some time Jatapi gateway is also disconnected. what could be the reason.