MPLS

Hello,please Urgent HelpI have ASR 1000 with asr1000rp2-adventerprisek  Version, when I give PPP Multilink to the dialer interface it show following error :FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image:MLP bundle , link download to CPP failedplea...

Dear Community member,I need you to assist to suggest possible reason for the following issues in the attached diagram.1. IGP is OSPF2. mpls is enable across the network.3. reachability is confirm between the two end cisco router where AToM config is...

Hi to all,I'm trying to establish IP conn ectivity between two 'SVI' interfaces on PE-7606 and PE- ASR9000.I configured xconnect betwwen them and it works, everything is up.How can I configure interface with IP on ASR so I can ping svi on 7606? I kno...

hello Experts I need help as usual from experts . We are planning to implement for one of Service provider IPTV technology . The idea we will install Dish satellites and Head-ends , middleware , VOD server on SP , and on end users as home users we wi...

Hello,I am working on a proof of concept for a design theory and am wondering what is the best practice configuration for having a redundant (multihomed) PE router? The PE router will use OSPF as the IGP (just like the P routers in the core) and the ...

Hi All,I have cisco 36xx connected to l2 node,we have the servcies on the bridge domain, but not on the evc of mpls;Please find the below config of bridgedomain & EVC. (Internet )BRAS -> Huawei DX(57xx)-> Cisco 36xx->CTS(3rd party) EVC CONFIGURATION:...

I use standard MPLS BGP-L3vpn to forward traffic between VRFs on Nexus 7k routers.  All of my VRFs are within the same BGP process, so have the same local-as. I'd like to bring-up an eBGP session from one VRF to a carrier, but the carriers requires t...

if RSVP tunnel is down and not coming up. In that case, RSVP will generate RSVP error message and tear down tunnel. My question is in that case, will MPLS traceroute will show me where LSP is breaking. I think answer is no as all rsvp states will cle...

MPLS Fast Reroute RFC says, during fast reroute is active, protected and backup LSP are distinguished by the sender IP address in sender template. Back up LSP will have the sender address as PLR IP address and protected LSP wil have sender IP address...

Hello, I have a switch with some VM's hanging off of it. I want to isolate VLAN 888 which is to be used for malware, so I therefore want it isolated BUT I want it to be able to access the Internet to download malware etc. I have set-up VRF on interfa...

Hi all. I config policy-map as belowPolicy Map 7MClass class-defaultpolice 7168000 224000 exceed-action dropBut when I apply it to interface and show policy-map interface. It not match any traffic******************************************************...

All - We have a very large MPLS network that another team manages, We just setup bgp peering at one of our sites and they are advertising all the prefixes they have.Is there a way to do a show command that tells me what the next hop address is on the...

If any subnet has 3 Route-targets or more, how it effects the performance of RIB, how memory or CPU is effected