Dear all,I want to use Cisco-AVpair from ACS radius to get the modem connection time (time-start like TACACS+).Could you help me how to do that.Thanks
Dear all,I want to use Cisco-AVpair from ACS radius to get the modem connection time (time-start like TACACS+).Could you help me how to do that.Thanks
I have dot1x port authentication enabled on a 3550 and it works, sort of. My XP workstation can access the network (I can browse, ping, telnet) but the domain login script does not run or has timed out and I lose my drive mappings. Any suggestions?
Before I used 2600 as ACS server client and using FastEthernet 0/0 as AAA Server authentication interface 。Now I want to change FastEthernet 0/0 to Loopback0 interface as authentication interface ,I couldn't found out any command can sepecify authent...
Hello folks, Has anybody tried ACS 3.3 for Windows on VMWare? Your experience is wellcome. Best regards
Dear colleagues,I have noticed several similar issues when TACACS is getting username <unknown> in accounting record from NAS.With 12.2 this works fine, but with 12.3 username is <unknown>Any suggestions please.I am about to open the TAC case on this...
I have a pix 501, with vpn users authenticating off of MS 2000 IAS. Works great although I want to filter a few users to only be able access a couple PC's when they come in through the pix.I created a new group on NT called Vendors, added the users t...
All,I have my ACS loaded on a Win2K server and when I log into a router is it true that the router is the NAS device and that it (the router) sends the username and password information to the ACS server for verification? Also is the information bein...
The following environment is given: Cisco Secure ACS 3.3 Solution Engine, Cisco Accesspoints 1231G, Cisco 2950 Switch,Windows XP Clients (SP2) and a Active Directory Userdatabase. All componentscan communicate with each other. Active Directory is con...
I am wondering if we are going to see or now have the ability to authenticate hosts on the lan with something other than a Username / Password? I am mostly concerned with ports on my network that the end device is a non 802.1x compliant device. Anyon...
I am having problems installing a certificate on the ACS 3.2.2 appliance.I generated a certificate request on a Windows server 2003 certificate server as per the ACS instructions. Got the sertificate and installed it on ACS without an issue (that I c...
Hi,IS ACS version 3.2 compatible with Windows 2003 server?Is there a guide on how to configure it?Thank you.Regards,Ron
Good dayIs it possible to configure, the router 2800 as server aaa and apply pin for authentication ?Any suggest will be appreciate.
ACS 3.3 run on w2k srv sp4 and I want to give to the clients (w2k-pro and XP) the possibility to change the password.Moreover I want to expire the password on temporal base, (for example, obligate the users to change password every 30 days).I try Use...
I am looking to configure ACS to map users to a ACS group from multiple domains in a single forest. Is there a way to create this mapping so that you don't have to configure a "WAN Team" (for example) group in every domain in the forest that has memb...
Hello, I have multiple sites linked together using PIXes (ver. 6.3) and IPSEC VPN's (with pre-shared keys) in a hub and spoke topology.I need to set up remote-access VPN access into the central PIX..My question is can I authenticate remote access use...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 04-27-2026 04:44 PM | ||
| 04-22-2026 01:25 PM | ||
| 03-05-2026 07:50 AM | ||
| 02-18-2026 03:44 PM | ||
| 02-10-2026 08:46 AM |
| User | Count |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |